BIRD Digital RF

• Attach Without Hardware - Standard Snap-In and SnapStak™ stackable hanger kits offer quick and easy attachment of coaxial cable in all types of weather.
• The hangers snap directly into 3/4" holes in tower support structures 0.120 to 0.150 inch thick. The heavy gauge stainless steel construction provides excellent corrosion resistance for long-term reliability.
• SnapStak™ hangers can be stacked up to three deep when using 1/2" and 7/8" coax and up to two deep when using 1-1/4" or 1-5/8" coax.
• The maximum recommended spacing listed are for standard conditions of 125 mph survival wind velocity and 1/2" radial ice.

MFR: Commscope
SKU: SSH-12

General Specifications
Grounding Kit Type: Standard Grounding Kits
Cable Type: Corrugated | Elliptical waveguide
Ordering Note: CommScope® non-standard product
Color: Black
Bonding Conductor Material: Copper
Bonding Conductor Wire Size: 6 gauge
Bonding Conductor Jacketing Material: PVC
Grounding Strap Material: Copper
Includes: Grounding kit | Hardware | Lug | One roll of 2 in PVC tape | One roll of 24 in butyl rubber tape
Lug Attachment: Factory attached
Lug Type: Two-hole lug
Package Quantity: 1
Rivet Material: Copper

New Old Stock * No longer available for esport
MFR: Andrew

CPT12R - Automated Prep Tool for 12R Sytle Connectors, MFG: Konectz

Includes butyl rubber tape and PVC tape
For 1/4"-1-5/8" Heliax
MFR: Andrew
NSN: 5970-01-425-7058
SKU: 221213

Cable Type: Corrugated
UV Resistance Test Method: MIL-STD-810E, Procedure 11, Method 505
UV Resistance, minimum with no degradation: ≥1000 hours

MFR: Andrew
SKU: 204679A-2

Use this clamp to attach to a tower or plate for hanging cable or wire. See below for matching hardware and hanger clamps. 10 pieces per pack
MFR: Commscope / Andrew
SKU: 243684
Note: Use the following hardware
243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

AISG RET Control Cable, 60m, 8 pin DIN Female to 8 pin DIN Male
Feeds data and power to RET system components, AISG and Rohs Compliant
MFR: CommScope
SKU: ATCB-B01-060

General Specifications
Tool Type: Hoisting grip
Hoisting Grip Type: Lace-up hoisting grip
Attachment Spacing Intervals: 61 m | 200 ft
Material Type: Stainless steel
Package Quantity 1
Support Clamp: Not included

MFR: Andrew / Commscope
SKU: 43094

• Connector: 7/16 DIN Male / 7/16 DIN Female Bulkhead
• Frequency: 806-960 / 1700-2170 mhz

New Old Stock * No longer available for export
MFR: Andrew
SKU: APT-BDFDM-LWB