BIRD Digital RF

RF Industries cable stripper tool strips 50 Ohm coaxial cable for preparing CompPro® 400 size connectors. The coax stripper provides one-step preparation for drop cables. Cassette blades that require no adjustment removes the proper length of jacket to meet SCTE and Bellcore specifications.

Ripley cable stripper is made of high-visibility red polymer that makes to difficult to lose this strip tool in your tool box. Replacement blade kit is also available: RC400-50

Cable Types: LMR400, CNT400

MFR: RF Industries
SKU: SDT400-50

F114 Monoblock Drill Prep Tool, 1-1/4 EC6-50 Eupen Cable, MFR: Eupen

F-78 Eupen Prep Tool 7/8" for EC5-50 Cable

MFR: Eupen
SKU: F-78

SPTC50AV12  Hand Prep Tool for standard 1/2" EC4-50 Cable

MFR: Eupen
SKU: SPTC50AV12

MCPT-A5-D  Manual Cable Preparation Tool for 7/8 in coaxial cable and A5 Connectors

• Tool Type: Manual cable preparation tool
• Application: Prepares cable for connector attachment
• Cutting Blade Life:  500 cable preparations

MFR: Andrew / Commscope
SKU: MCPT-A5-D

• Prepares cable for grounding kit attachment
• Cutting Blade Life: 150 cable preparations
• Cutting Blades Included: 1
• Material Type: Aluminum | Steel

MFR: CommScope
SKU: GKT-L4SG

Grounding Kit Preparation Tool for 7/8 in corrugated cable
MFR: CommScope
SKU: GKT-78SG

EUTK158  Mini Tool Kit for 1-5/8" Eupen Cable and connectors, MFR: Eupen

KIT INCLUDES:

• F-158 1 5/8" MonoBlock Drill-mount Cable Prep Tool 1
• TQ-214-F37 1 5/8" Back Nut Torque Wrench 1
• 5472A3 1 5/8" Spanner Wrench 1
• SPB11 Trim Head Blade, F-158 1
• B711 1 5/8" Main O-Rings 5

Universal Stripping tool for most popular cable sizes.  Uses 3 blades to cut most cables for RF Industries and Amphenol style connectors in the following cable

Groups:  C, C1, C2, D, Q, and X.  See below for cable types.  For Left or Right hand use.  Replacement blades are available:  RFA4086-R03

• Cable Group: C, C1, C2, D, Q, X
• Cable Type: RG6, 58, 59, 62, 142, LMR195, 200, & 240

MFR: RF Industries
SKU: RFA-4086-003

NOTE: This tool is designed to produce the primary cuts. You will need to refer to the strip length dimensions on our drawing and manually adjust the final cuts accordingly.