1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Not finding what you are searching for. Try a partial part number.

BIRD Digital RF

BIRD5019B Power Sensor, Bird, BIRD5012D Bird TERMINATING POWER SENSOR, 350 MHz-4 GHz, For Bird 5000XT, , BIRD5011EF Bird TERMINATING POWER SENSOR, 40 MHz-12 GHz, For Bird 5000XT, , BIRD5A5000-1 Soft Carrying Case for 5000-XT, Digital Power Meter, BIRD, CD81030-110 C.D., digital wattmeter, 110 vac w/type-n female, Coaxial Dynamics, BIRD5010B Bird Power Sensor for 5000XT, Bird Electronics, BIRDAT500 - Bird Antenna Tester, Bird

List  Grid 

per page
Set Descending Direction
  1. CT-400/300 Times Microwave Crimp Tool for LMR®400/300 Crimp Connectors

    CT-400/300 Times Microwave Crimp Tool for LMR®400/300 Crimp Connectors

    $180.91

    Crimp Tool for LMR®400/300 Crimp Connectors
    Crimping tool for Times Microwave connectors. Can be used for LMR®400 and LMR®300 connectors. 
    MFR #: 3190-666
    MFR: Ripley for Times Microwave System
    SKU: CT-400/300

    LMR® is a registered trademark of Times Microwave Systems.

  2. HT-301 Deluxe Ratchet Crimping Handle/Die for Insulated Connectors 10-22 ga (63-1007) 8.7"

    HT-301 Deluxe Ratchet Crimping Handle/Die for Insulated Connectors 10-22 ga (63-1007) 8.7"

    $16.91

    HT-301 Deluxe Ratchet Crimping Handle/Die for Insulated Connectors 10-22 ga (63-1007) 8.7"

    SKU: HT-301

  3. RFA-4005-300 RF Industries Crimp Handle & Die 3 Cavity .100" .128" .429"

    RFA-4005-300 RF Industries Crimp Handle & Die 3 Cavity .100" .128" .429"

    $69.91 As low as: $66.41

    Includes:

    • Crimper Tool with Hex Die RFA-4005-02 (.100 inches, .128 inches, .429 inches) in Cardboard Box
    • Precision Die Set used to crimp RG-8/U, RG-213/U, Belden 9913 cables. (Shipped without plastic case.)

    MFR: RF Industries
    SKU: RFA-4005-300

  4. KIT400 RF Industries Complete Tool Kit for Type-N Male Connectors for Cable Group I

    KIT400 RF Industries Complete Tool Kit for Type-N Male Connectors for Cable Group I

    $498.91

    Complete Tool Kit for CompPro® Compression Type-N Male Connector Assemblies
    Cable Group I, LMR400, CNT400,
    MFR: RF Industries
    SKU: KIT400

  5. 47021 Amphenol Ratcheting Hand Crimp Tool for LMR®500/LMR®600

    47021 Amphenol Ratcheting Hand Crimp Tool for LMR®500/LMR®600

    $158.91

    Ratcheting Hand Crimp Tool for LMR®500/LMR®600
    MFR: Amphenol
    SKU: 47021

    LMR® is a registered trademark of Times Microwave Systems.

  6. CRIMPBAG - Powerpole Crimping Tool KIT/Handle - Die Combo Set

    CRIMPBAG - Powerpole Crimping Tool KIT/Handle - Die Combo Set

    Regular Price: $109.91

    Special Price $104.95

    The Crimp Bag includes the best Powerpole Crimping Tool for 15, 30 and 45 amp contacts, and interchangeable accessory die sets to expand the functionality of your TRIcrimp tool, packaged inside an oversized nylon bag to hold all of your Powerpole gear.

    MFR: Powerwerx
    SKU: CRIMPBAG

  7. TK400EZ Times Microwave Tool Kit for LMR®400 Crimp Connectors

    TK400EZ Times Microwave Tool Kit for LMR®400 Crimp Connectors

    $420.91

    Tool Kit for LMR®400 Crimp Connectors
    (Kit includes: CCT-01/CT400/300/CST400)
    MFR: Times Microwave SYstems
    SKU: TK400EZ

    LMR® is a registered trademark of Times Microwave Systems.

  8. TK-01 Times Microwave Installation Tool Kit for both LMR®400 & 600 Connectors

    TK-01 Times Microwave Installation Tool Kit for both LMR®400 & 600 Connectors

    $1,311.91

    Out of stock

    Installation Tool Kit for both LMR®400 & 600 connectors

    Kit includes the following:

    CT-U Crimp Handle with 2 dies (0.429 - Y1719 & 0.610 - Y1720), CCT-02 Cutting Tool, CST-400 Stripping Tool for LMR®400 Connectors, CST-600 Stripping Tool for LMR®600 Connectors, and tool pouch.

    Special Order, Delivery is 3-4 weeks

    MFR: Times Microwave Systems
    SKU: TK-01

    LMR® is a registered trademark of Times Microwave Systems.

  9. RFA-4006-500 RF Industries Master Crimp Kit with 2 Handles and 22 Dies

    RFA-4006-500 RF Industries Master Crimp Kit with 2 Handles and 22 Dies

    $591.91

    The RFA-4006-500 kit contains two RFA-4005-20 crimp handles and seventeen interchangeable die sets in one convenient, foam-lined plastic case.  With on kit you can crimp terminials and coaxial cable from RG174/U to LMR400.  This is the most complete kit offered, and is sure to be a popular one for installers, field techincians and production floor use.

    Includes:

    • 2 RFA-4005-20 Handles
    • 7 Dies for crimping insulated and non-insulated terminals
    • 10 Dies for crimping coaxial cable ranging from RG-174/u to LMR-400 sizes
    • In foam lined plastic case.

    MFR: RF Industries
    SKU: RFA4006-500

  10. CT240/200/195/100 Times Crimp Tool for LMR®100, LMR®195, 200, 240 Connectors

    CT240/200/195/100 Times Crimp Tool for LMR®100, LMR®195, 200, 240 Connectors

    $240.91

    Crimp Tool for LMR®100, 195, 200, 240 Connectors

    MFR: Times Microwave
    SKU: CT240/200/195/100

    LMR® is a registered trademark of Times Microwave Systems.

Items 11 to 20 of 21 total

Page:
  2. 1
  3. 2
  4. 3
Shop By

Currently Shopping by:

  1. Category: Crimper Kits / Handle-Die Sets Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Amphenol
  2. Powerwerx
  3. RF Industries
  4. Times Microwave
Product Categories
Hours Monday - Friday
7:00 - 3:30 PST

 Celebrating 50 years in business

RF Parts Company

435 S Pacific St
San Marcos, CA, 92078, USA

1-800-RFPARTS (1-800-737-2787)

1-760-744-0700, #1

Minimum Order
  • Fifteen ($15.00), all inclusive.
  • Preferred Payments for Domestic and International Purchases: PayPal, VISA, MasterCard, American Express, Direct Deposit, and Wire Transfer.
  • All checks will be held for clearance. This process takes 5 - 7 business days.

Buy with confidence



© 1998 to RF Parts Company. All Rights Reserved.