1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Not finding what you are searching for. Try a partial part number.

BIRD Digital RF

BIRD5019B Power Sensor, Bird, BIRD5012D Bird TERMINATING POWER SENSOR, 350 MHz-4 GHz, For Bird 5000XT, , BIRD5011EF Bird TERMINATING POWER SENSOR, 40 MHz-12 GHz, For Bird 5000XT, , BIRD5A5000-1 Soft Carrying Case for 5000-XT, Digital Power Meter, BIRD, CD81030-110 C.D., digital wattmeter, 110 vac w/type-n female, Coaxial Dynamics, BIRD5010B Bird Power Sensor for 5000XT, Bird Electronics, BIRDAT500 - Bird Antenna Tester, Bird

List  Grid 

per page
Set Descending Direction
  1. COMP-NRA-400 RF Industries Type-N Male Right Angle Connector Assembly

    COMP-NRA-400 RF Industries Type-N Male Right Angle Connector Assembly

    $39.91 As low as: $34.66

    RF Industries Compression Type-N Right Angle male connector for 400 sized cables. Captivated center pin, non-corrosive materials and one piece design. Water Tight Seal.
    Cable Group: I
    Cable Types: LMR400, CNT400
    Freq:  DC-6 GHz
    Ohms: 50
    MFR: RF Industries
    SKU: COMP-NRA-400

  2. COMP-TRA-400 RF Industries TNC Male Right Angle Connector for Cable Group I

    COMP-TRA-400 RF Industries TNC Male Right Angle Connector for Cable Group I

    $46.91 As low as: $42.33

    RF Industries Compression TNC Right Angle male connector for 400 sized cables. Captivated center pin, non-corrosive materials and one piece design. Water Tight Seal.
    Cable Group: I
    Cable Types: LMR400, CNT400
    Freq:  DC-6 GHz
    Ohms: 50 
    MFR: RF Industries
    SKU: COMP-TRA-400 

  3. COMP-TM-400 RF Industries Straight TNC Male Compression Connector

    COMP-TM-400 RF Industries Straight TNC Male Compression Connector

    $26.91 As low as: $22.71

    RF Industries Compression TNC male connector for 400 sized cables. Captivated center pin, non-corrosive materials and one piece design. Water Tight Seal.
    Cable Group: I
    Cable Types: LMR400, CNT400
    Freq:  DC-6 GHz
    Ohms: 50 
    Interface Type: N, Male
    Insulator: Ultem® 1000
    Gasket: Silicone Rubber
    MFR: RF Industries
    SKU: COMP-TM-400 

  4. KIT400 RF Industries Complete Tool Kit for Type-N Male Connectors for Cable Group I

    KIT400 RF Industries Complete Tool Kit for Type-N Male Connectors for Cable Group I

    $498.91

    Complete Tool Kit for CompPro® Compression Type-N Male Connector Assemblies
    Cable Group I, LMR400, CNT400,
    MFR: RF Industries
    SKU: KIT400

  5. KIT400NT RF Industries Complete Tool Kit for Type-N Male & TNC Male Connector Assemblies

    KIT400NT RF Industries Complete Tool Kit for Type-N Male & TNC Male Connector Assemblies

    $657.91

    Complete Tool Kit for CompPro® Compression Type-N Male & TNC Male Connector Assemblies
    Cable Group I, LMR400, CNT400
    MFR: RF Industries
    SKU: KIT400NT

  6. VT500 RF Industries Compression Tool for CompPro Connectors

    VT500 RF Industries Compression Tool for CompPro Connectors

    $162.91

    Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: VT500

  7. SDT400-50 RF Industries Stripping Tool for CompPro Connectors and Cable Group I

    SDT400-50 RF Industries Stripping Tool for CompPro Connectors and Cable Group I

    $88.91

    RF Industries cable stripper tool strips 50 Ohm coaxial cable for preparing CompPro® 400 size connectors. The coax stripper provides one-step preparation for drop cables. Cassette blades that require no adjustment removes the proper length of jacket to meet SCTE and Bellcore specifications.

    Ripley cable stripper is made of high-visibility red polymer that makes to difficult to lose this strip tool in your tool box. Replacement blade kit is also available: RC400-50

    Cable Types: LMR400, CNT400

    MFR: RF Industries
    SKU: SDT400-50

  8. RC400-50 Ripley Replacement Blade Cartridge for SDT400-50

    RC400-50 Ripley Replacement Blade Cartridge for SDT400-50

    $47.91

    This replacement blade kit is for the Ripley coax cable stripper SDT400-50 for CompPro® 400 connectors. SDT400-50 connector strip tool uses cassette blades that do not require adjustments.
    Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: Ripley
    SKU: RC400-50

     

  9. IT50NM RF Industries Insertion Tool for CompPro Type-N Male Connectors

    IT50NM RF Industries Insertion Tool for CompPro Type-N Male Connectors

    $36.91

    100% machined Aluminium
    T-Insertion Tool 2-1/2" Overall Length
    Used to install COMP-NM-400.
    Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: IT50NM 

     

  10. IT50TA RF Industries Insertion Tool for CompPro Type-N to TNC Male Connectors

    IT50TA RF Industries Insertion Tool for CompPro Type-N to TNC Male Connectors

    $36.91

    100% machined Aluminium
    T-Insertion Tool 2-1/2" Overall length. 
    Used to install COMP-NM-400 and COMP-TM-400Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: IT50TA

     

Items 171 to 180 of 1035 total

Page:
  2. 16
  3. 17
  4. 18
  5. 19
  6. 20
Shop By

Currently Shopping by:

  1. Category: Connectors - RF Coaxial Remove This Item
Clear All

Shopping Options

Category
  1. CompPro Series
  2. PL259 (SOLDER TYPE) * SEE UHF FOR CRIMP OR CLAMP TYPE *
  3. SO-239 Female UHF Connectors * SEE UHF FOR CRIMP OR CLAMP TYPE *
  4. 7/16 DIN
  5. BNC
  6. C Connectors
  7. EIA FLANGE
  8. Type F
  9. FME
  10. HN
  11. LC
  12. MC CARD
  13. MCX & MMCX
  14. MHV
  15. Microphone Connectors
  16. Type N
  17. QDS
  18. QMA
  19. RCA
  20. Reverse Polarity
  21. Reverse Thread
  22. SMA
  23. SMB & SSMB
  24. TNC
  25. Twin Ax
  26. Mini UHF
  27. 4.3-10
  28. UG Connectors (Military Grade)
  29. UHF
  30. Replacement Crimp Ferrules
  31. Binding Post Terminals
  32. Bird Line Section
  33. 1/4" Mono Phone Connector plug
  34. End / Weather Caps
  35. Strain Relief Boots
  36. INSTALLATION OF CONNNECTORS
  37. WeatherProofing
  38. XLR
Manufacturer
  1. AEP
  2. Allied/Amphenol
  3. Amp Inc
  4. Amphenol
  5. Amphenol (182120-10)
  6. Amphenol (Old Version) NOS
  7. Amphenol / Connex
  8. Amphenol / RF
  9. Amphenol/Connex
  10. Amphenol/RF
  11. Andrew
  12. Andrew / Commscope
  13. Andrew/Commscope (Replaces L44R)
  14. Automatic Metal Products
  15. AVA Corp
  16. Bendix
  17. Bird Electronics
  18. Carter Craft
  19. Delta
  20. Delta Electronics, Inc
  21. Delta RF
  22. EF Johnson
  23. ERI
  24. ERI (Replaces Andrew 34660)
  25. ERI for Andrew
  26. HH Smith
  27. Huber Suhner
  28. ITT / SEALECTRO CORP.
  29. Johnson
  30. Kings
  31. Kings or TRU
  32. M/A-COM/ Omni Spectra
  33. Midwest
  34. Past
  35. Pomona
  36. Radiall
  37. RF Indistries
  38. RF Industries
  39. RF Industries, N/G/T
  40. RF Industriies
  41. RF Inuustries
  42. RFI
  43. RFIndustries
  44. RFS / Cablewave
  45. San-Tron
  46. STAR
  47. Star Connector
  48. TED
  49. Times
  50. Times Microwave
  51. Winchester
Product Categories
Hours Monday - Friday
7:00 - 3:30 PST

 Celebrating 50 years in business

RF Parts Company

435 S Pacific St
San Marcos, CA, 92078, USA

1-800-RFPARTS (1-800-737-2787)

1-760-744-0700, #1

Minimum Order
  • Fifteen ($15.00), all inclusive.
  • Preferred Payments for Domestic and International Purchases: PayPal, VISA, MasterCard, American Express, Direct Deposit, and Wire Transfer.
  • All checks will be held for clearance. This process takes 5 - 7 business days.

Buy with confidence



© 1998 to RF Parts Company. All Rights Reserved.