1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Coaxial Cable & Accessories

Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss.  Here is more information on Coaxial Cables

Custom Cables and Custom Cable Assemblies

RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.

Coaxial Cables and Accessories

Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )

Heliax Type Cable
Heliax

Waveguide (Elliptical Wavegude)

Waveguide

Heliax Specials
Heliax Specials

LMR- Times Microwave Coax Cables
LMR Cable

RG - Belden Coax Cables
RG Cable
CNT - Andrew Coax Cables
CNT Cables

RG - Other brand Coax Cables
RG Other Cables

Preassembled Coax Cables
Pre Assembled

Rotor Cable
Rotor Cable
Coaxial Cable Tools
Cable Tools

Grounding Kits

Grounding Kit

Ground Buss Bars

Ground Buss Bar

Cable Entry Boot

Cable Entry Boot

Hanger Kits

Hanger Kit

Hoisting Grip

Hoisting Grip

Mounting Hardware

Mounting Hardware

LMR® is a registered trademark of Times Microwave Systems.

Here is a list of which cables go in which cable groups. PDF

List  Grid 

per page
Set Ascending Direction
  1. 31768A  Angle Adapter, standard, 3/8 in tapped hole

    31768A Angle Adapter, standard, 3/8 in tapped hole

    31768A  Angle Adapter, standard, 3/8 in tapped hole, MFR: Commscope / Andrew

  2. 31670-2 CommScope® Adapter Kit for 2" to 3" Round Tower Members (10 per package)

    31670-2 CommScope® Adapter Kit for 2" to 3" Round Tower Members (10 per package)

    Use with 249561 Clamp

    • Compatible Diameter, maximum 76.2 mm   |   3 in
    • Compatible Diameter, minimum 50.8 mm   |   2 in
    • Material Thickness 0.711 mm   |   0.028 in
    • Material Type Stainless steel

    MFR: CommScope
    SKU: 31670-2

  3. 252029-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    252029-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    $43.91

    MFR: Commscope / Andrew
    SKU: 252029-10KT-P
    Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps.  See below.
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Clamp for 5/16" Rod 
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire 

  4. UA-3 CommScope Universal Angle Adapter Kit with 3/4" Hole (Snap-Ins), 10/Pkg

    UA-3 CommScope Universal Angle Adapter Kit with 3/4" Hole (Snap-Ins), 10/Pkg

    $112.91

    Universal Angle Adapter Kit with 3/4" Hole (Snap-Ins), 10/Pkg
    MFR: CommScope
    SKU: UA-3

  5. KIT-A  Mounting Bracket and Mast Pipe Kit, Radiall / Larsen (NOS)

    KIT-A Mounting Bracket and Mast Pipe Kit, Radiall / Larsen (NOS)

    $24.91

    The bracket and support pipe included in this package is the same included with the GPS0015-C GPS antenna made by Radiall/Larsen.

    • Bracket fits 1" pipe
    • Pipe is 12-5/8" long x 1" outside diameter

    New Old Stock * No longer available for export
    MFR: Radiall/Larsen
    SKU: KIT-A-15-C

  6. 31670-3 Andrew Adapter Kit for 3" to 4" Round Tower Members (10 per package)

    31670-3 Andrew Adapter Kit for 3" to 4" Round Tower Members (10 per package)

    Use with 294561 Clamp

    Adapters are 1.13 to 4.5 Inch in Diameter

    MFR: Andrew
    SKU: 31670-3

  7. HG-600T Times Microwave Split Laced Type Hoisting Grip for LMR600

    HG-600T Times Microwave Split Laced Type Hoisting Grip for LMR600

    $29.91

    Hoisting Grips provide an effective method for lifting coax cables to the top of a tower where it is tied off to support the cable weight.

    MFR: Times Microwave
    SKU: HG-600T

  8. HG400T Hoisting Grip LMR400

    HG400T Hoisting Grip LMR400

    $32.95

    Hoisting grip , lmr400
  9. 252026-10KT-P Andrew Angle Adapter with Miniature 5/16" Tapped Hole 10/Pkg (Clamp Only)

    252026-10KT-P Andrew Angle Adapter with Miniature 5/16" Tapped Hole 10/Pkg (Clamp Only)

    $57.91

    Use this clamp to attach to a tower or plate for hanging cable or wire.  See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 252026-10KT-P

    NOTE:  Use the following hardware:
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger clamp  (Rod is 2-1/2") 
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger clamp  (Rod is 6")  
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger clamps  (Rod is 10-5/16") 
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire 
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire 
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire 

  10. 252027-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    252027-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    $39.91

    Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps.  See below.
    MFR: Commscope
    SKU: 252027-10KT-P 
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Clamp for 5/16" Rod 
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger clamps  (Rod is 6")
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger clamps  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

Items 1 to 10 of 506 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5