Search results for: '2,5MH rf choke'

RFA-4005-520 RF Industries Coax Crimp tool and Die Set with Stripping Tool

$333.90 As low as: $317.21

This kit contains the RFA-4005-20 crimp handle, the RFA-4087 coaxial stripper and ten interchangeable die-sets with hex cavities ranging from 0.042” to 0.429” across the flats. This assortment will crimp most coaxial connectors and contacts. All are contained in a rugged, foam-lined case.

MFR: RF Industries
SKU: RFA-4005-520

| Add to Compare

RFA-4005-501 RF Industries Crimping Tool Kit with 6 Dies and Hard Case

$229.91

The RFA-4005-501 is supplied with one RFA-4005-20 crimping tool frame and six die sets. The RFA-4005-501 includes the following dies:
RFA-4005-01, -02, -05, -06, -07, & -10.

NOTE: CAN BE USED IN INDUSTRIAL APPLICATIONS.
MFR: RF Industries
SKU: RFA-4005-501

| Add to Compare

RFA-4005-20 RF Industries Crimping Tool Handle

$65.90 As low as: $62.61

The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors ratchet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism.

MFR: RF Industries
SKU: RFA-4005-20

See Die Sets

| Add to Compare

RFA-4005-14 RF Industries Die set for RFA4005 Crimp Handle

$34.91 As low as: $33.29

This die size is for LMR400 cable. The die sizes are for both the center pin and ferrule.
MFR: RF Industries
SKU: RFA-4005-14

| Add to Compare

RFA-4005-09 RF Industries Die Set for RFA4005-20 Crimp Handle

$37.90 As low as: $36.00

For Cable Group B, RG316, RG174
MFR: RF Inudtries
SKU: RFA-4005-09

| Add to Compare

RFA-4005-08 RF Industries Die Set for RFA-4005-20 Crimp Handle

$27.91 As low as: $26.51

The RFA-4005-08 Precision Die Set. Hex Cavity Dimensions: .324, .255, .068, .042
For Cable Group D & G: RG59/U & 8281
MFR: RF Industries
SKU: RFA-4005-08

| Add to Compare

RFA-4005-04 RF Industries Die Set for RFA-4005-20 Crimp Handle

$32.90 As low as: $31.26

The RFA-4005-04 Precision Die Set is used to crimp RG-59-62/U, CP-88, CP-89 cables.
Hex Cavity Dimensions: .239, .068, .319 inch
MFR: RF Industries
SKU: RFA-4005-04

| Add to Compare

RFA-4005-02 RF Industries Die Set for RFA-4005-20 Crimp Handle

$37.90 As low as: $36.00

The RFA-4005-02 Precision Die Set is used to crimp RG-8/U, RG-213/U, RG-214/U, and Belden 9913 cables.
Hex Cavity Dimensions: .100, .128, .429 inch
Die set for Cable Group E, F, I cables: RG8, 213, 214, 9913, & LMR400 type cables.
NOTE: Will also work on PALADIN 1300 SERIES.
MFR: RF Industries
SKU:RFA-4005-02

| Add to Compare

RFA-4005-01 RF Industries Die Set for RFA-4005-20 Crimp Handle

$37.90 As low as: $36.00

The RFA-4005-01 Precision Die Set. Hex Cavity dimensions are: .052, .068, .100, .213, .255
Will work on the following cables: RG-58/U, RG-59/U, RG-142/U, RG-223/U, RG-400/U, RG-8X, LMR195, LMR240, Proflex and various video cables.
MFR: RF Industries
SKU: RFA-4005-01

NOTE: Will also work on PALADIN 1300 SERIES.

| Add to Compare

RFA-4005 RF Industries Crimping Tool Kit in Hard Case

$174.90

The RFA-4005 is supplied with one RFA-4005-20 crimping tool frame and two die sets, the RFA-4005-01 and the RFA-4005-02. All contained in a durable, padded, self-storage case.

MFR: RF Industries
SKU: RFA-4005