Coaxial Cable & Accessories

7/8" HELIAX® Andrew Virtual Air™ Coaxial Cable, corrugated copper, black PE jacket (Halogen free jacketing non-fire-retardant) tested C-Band and CBRS qualified. (AVA5-50)

CommScope's HELIAX AVA5 and AVA6 C-band coaxial feeder cables deliver all the performance and value of the legacy HELIAX AVA products, with one important difference: Now, C-band has been enabled. Additionally, the AVA6 C-band coaxial feeder cable is uniquely optimized and tested to deliver a 0.5 dB gain in performance over AVA5-enabling MNOs to get even more from their C-band investment.

Sold by the foot * minimum 10 feet

Jacket Material: PE
Outer Conductor Material: Corrugated copper
Dielectric Material: Foam PE
Flexibility: Standard
Inner Conductor Material: Corrugated copper tube
Jacket Color: Black
Cable Impedance 50 ohm ±1 ohm

All HELIAX coaxial cables are jacketed for direct burial or for corrosive environmental conditions. Standard jacketing material is weather-resistant polyethylene suitable for use in extreme climates.

MFR: Commscope® / Andrew
SKU: AVA5P-50-C

SH-U78  Snap-In Hanger Kit for 7/8" Cable. Can use with Smooth or Corrugated Cable.  MFR: Eupen

• Attach Without Hardware - Standard Snap-In and SnapStak™ stackable hanger kits offer quick and easy attachment of coaxial cable in all types of weather.
• The hangers snap directly into 3/4" holes in tower support structures 0.120 to 0.150 inch thick. The heavy gauge stainless steel construction provides excellent corrosion resistance for long-term reliability.
• SnapStak™ hangers can be stacked up to three deep when using 1/2" and 7/8" coax and up to two deep when using 1-1/4" or 1-5/8" coax.
• The maximum recommended spacing listed are for standard conditions of 125 mph survival wind velocity and 1/2" radial ice.

MFR: Commscope
SKU: SSH-12

SSHAK-3812 Stackable Snap-In Hanger Kit for 3/8" RET Cables, 10/Pkg

MFR: Andrew / Commscope
SKU: SSHAK-3812

WSDCB12  Mini Cable Block for 1/2" Cable. Supports 2 cable runs.  MFR: Wireless Solutions.

Single stack
Includes hardware and angle adapter
MFR: Andrew / Commscope
SKU: SHK-12-1-P

42396A-2  Butterfly Hanger for 1-5/8 in coaxial cable(10pcs per pack), MFR: Andrew / Commscope

Hanger clamp for 2 cables.  Use with 252026-10KT-P Angle clamp and 5/16" Rod & Hardware kit.  See options below.
MFR: Andrew/CommScope
SKU: 68MCLICK
NOTE:  Use the following hardware:
252026-10KT-P  Angle Adapter, miniature, (5/16") tapped hole, 10pk (Clamp Only)
252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
252029-10KT-P  5/16" Rod & hardware for stacking three hanger kits  (Rod is 10-5/16")
68MCLICK  Hanger Clamp for 6-8mm Cable or wire
912MCLICK  Hanger Clamp for 9-12mm Cable or wire
1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

Double stack
Includes hardware and angle adapter
MFR: Andrew / Commscope
NOTE: SPECIAL ORDER.  LEAD TIME IS 8 WEEKS ARO