1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Not finding what you are searching for. Try a partial part number.

  • Home /
  • Coaxial Cable & Accessories

Coaxial Cable & Accessories

Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss.  Here is more information on Coaxial Cables. 

Custom Cables and Custom Cable Assemblies

RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.

Coaxial Cables and Accessories

Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )

Heliax Type Cable
Heliax

Waveguide (Elliptical Wavegude)

Waveguide

 Heliax Specials
Heliax Specials

LMR- Times Microwave Coax Cables
LMR Cable
RG - Belden Coax Cables
RG Cable
 CNT - Andrew Coax Cables
CNT Cables

RG - Other brand Coax Cables
RG Other Cables

Preassembled Coax Cables
Pre Assembled
Rotor Cable
Rotor Cable
 Coaxial Cable Tools
Cable Tools

Grounding Kits

Grounding Kit

Ground Buss Bars

Ground Buss Bar

Cable Entry Boot

Cable Entry Boot

Hanger Kits

Hanger Kit

Hoisting Grip

Hoisting Grip

Mounting Hardware

Mounting Hardware

LMR® is a registered trademark of Times Microwave Systems.

Here is a list of which cables go in which cable groups. PDF

List  Grid 

per page
Set Descending Direction
  1. SHK-12-2-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    SHK-12-2-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    $7.91 As low as: $7.20

    Double stack
    Includes hardware and angle adapter
    MFR: Andrew / Commscope
    NOTE: SPECIAL ORDER.  LEAD TIME IS 8 WEEKS ARO

     

  2. 1316MCLICK Andrew/CommScope Miniature Click-on Hanger for 13–16 mm cable 10/Pkg (Clamps Only)

    1316MCLICK Andrew/CommScope Miniature Click-on Hanger for 13–16 mm cable 10/Pkg (Clamps Only)

    $33.90

    Hanger clamp for 2 cables.  Use with 252026-10KT-P Angle clamp and 5/16" Rod & Hardware kit.  See options below.
    NOTE: Hardware Sold Separately
    MFR: Andrew/CommScope
    SKU: 1316MCLICK
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Adapter, miniature, (5/16") tapped hole, 10pk (Clamp Only)
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger kits  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire

  3. 912MCLICK Andrew/CommScope Miniature Click-on Hanger for 9–12 mm Cable 10/Pkg (Clamp Only)

    912MCLICK Andrew/CommScope Miniature Click-on Hanger for 9–12 mm Cable 10/Pkg (Clamp Only)

    $29.90

    Hanger clamp for 2 cables.  Use with 252026-10KT-P Angle clamp and 5/16" Rod & Hardware kit.  See options below.
    MFR: Andrew/CommScope
    SKU: 912MCLICK
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Adapter, miniature, (5/16") tapped hole, 10pk (Clamp Only)
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger kits  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

  4. 68MCLICK CommScope Double Click-on Hanger for 6-8mm Cable 10/Pkg (Clamps only)

    68MCLICK CommScope Double Click-on Hanger for 6-8mm Cable 10/Pkg (Clamps only)

    $29.90

    Hanger clamp for 2 cables.  Use with 252026-10KT-P Angle clamp and 5/16" Rod & Hardware kit.  See options below.
    MFR: Andrew/CommScope
    SKU: 68MCLICK
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Adapter, miniature, (5/16") tapped hole, 10pk (Clamp Only)
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger kits  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

  5. SHK-12-1-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    SHK-12-1-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    $8.91 As low as: $7.64

    Single stack
    Includes hardware and angle adapter
    MFR: Andrew / Commscope
    SKU: SHK-12-1-P

     

  6. TIE15-100 3M™ 15" Black Nylon Cable Ties -100/pkg 120lb Tensile Strength

    TIE15-100 3M™ 15" Black Nylon Cable Ties -100/pkg 120lb Tensile Strength

    $21.91

    TIE15-100 3M™ 15" Black Nylon Cable Ties - 100/pkg 120lb Tensile Strength

    MFR: 3M™ Company
    SKU: INFTIE-15-100  

    See Data Sheet Tab Below

  7. WSDCB12 Mini Cable Block for 1/2" Cable. Supports 2 cable runs. Wireless Solutions

    WSDCB12 Mini Cable Block for 1/2" Cable. Supports 2 cable runs. Wireless Solutions

    Regular Price: $19.95

    Special Price $15.95

    WSDCB12  Mini Cable Block for 1/2" Cable. Supports 2 cable runs.  MFR: Wireless Solutions.

     

  8. 42396A-2 Andrew Hanger Kit for 1-5/8" LDF7-50 Heliax Cable

    42396A-2 Andrew Hanger Kit for 1-5/8" LDF7-50 Heliax Cable

    $32.91 As low as: $31.26

    42396A-2  Butterfly Hanger for 1-5/8 in coaxial cable(10pcs per pack), MFR: Andrew / Commscope

     

  9. SSHAK-3812 Stackable Snap-In Hanger Kit for 3/8" RET Cables, 10/Pkg

    SSHAK-3812 Stackable Snap-In Hanger Kit for 3/8" RET Cables, 10/Pkg

    $58.91

    SSHAK-3812 Stackable Snap-In Hanger Kit for 3/8" RET Cables, 10/Pkg

    MFR: Andrew / Commscope
    SKU: SSHAK-3812

     

  10. SSH-12 Commscope Stackable Snap-In Hanger Kit for 1/2" Heliax Cable - 10/Pkg

    SSH-12 Commscope Stackable Snap-In Hanger Kit for 1/2" Heliax Cable - 10/Pkg

    $28.90 As low as: $26.90

    • Attach Without Hardware - Standard Snap-In and SnapStak™ stackable hanger kits offer quick and easy attachment of coaxial cable in all types of weather.
    • The hangers snap directly into 3/4" holes in tower support structures 0.120 to 0.150 inch thick. The heavy gauge stainless steel construction provides excellent corrosion resistance for long-term reliability.
    • SnapStak™ hangers can be stacked up to three deep when using 1/2" and 7/8" coax and up to two deep when using 1-1/4" or 1-5/8" coax.
    • The maximum recommended spacing listed are for standard conditions of 125 mph survival wind velocity and 1/2" radial ice.

    MFR: Commscope
    SKU: SSH-12

Items 11 to 20 of 22 total

Page:
  2. 1
  3. 2
  4. 3
Shop By

Currently Shopping by:

  1. Category: Hanger Kits Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Andrew
  2. Andrew / Commscope
  3. Andrew/ Commscope
  4. Commscope
Product Categories
Hours Monday - Friday
7:00 - 3:30 PST

 Celebrating 50 years in business

RF Parts Company

435 S Pacific St
San Marcos, CA, 92078, USA

1-800-RFPARTS (1-800-737-2787)

1-760-744-0700, #1

Minimum Order
  • Fifteen ($15.00), all inclusive.
  • Preferred Payments for Domestic and International Purchases: PayPal, VISA, MasterCard, American Express, Direct Deposit, and Wire Transfer.
  • All checks will be held for clearance. This process takes 5 - 7 business days.

Buy with confidence



© 1998 to RF Parts Company. All Rights Reserved.