1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Coaxial Cable & Accessories

Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss.  Here is more information on Coaxial Cables

Custom Cables and Custom Cable Assemblies

RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.

Coaxial Cables and Accessories

Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )

Heliax Type Cable
Heliax

Waveguide (Elliptical Wavegude)

Waveguide

Heliax Specials
Heliax Specials

LMR- Times Microwave Coax Cables
LMR Cable

RG - Belden Coax Cables
RG Cable
CNT - Andrew Coax Cables
CNT Cables

RG - Other brand Coax Cables
RG Other Cables

Preassembled Coax Cables
Pre Assembled

Rotor Cable
Rotor Cable
Coaxial Cable Tools
Cable Tools

Grounding Kits

Grounding Kit

Ground Buss Bars

Ground Buss Bar

Cable Entry Boot

Cable Entry Boot

Hanger Kits

Hanger Kit

Hoisting Grip

Hoisting Grip

Mounting Hardware

Mounting Hardware

LMR® is a registered trademark of Times Microwave Systems.

Here is a list of which cables go in which cable groups. PDF

List  Grid 

per page
Set Descending Direction
  1. 1316MCLICK Andrew/CommScope Miniature Click-on Hanger for 13–16 mm cable 10/Pkg (Clamps Only)

    1316MCLICK Andrew/CommScope Miniature Click-on Hanger for 13–16 mm cable 10/Pkg (Clamps Only)

    $31.91

    Hanger clamp for 2 cables.  Use with 252026-10KT-P Angle clamp and 5/16" Rod & Hardware kit.  See options below.
    NOTE: Hardware Sold Separately
    MFR: Andrew/CommScope
    SKU: 1316MCLICK
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Adapter, miniature, (5/16") tapped hole, 10pk (Clamp Only)
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger kits  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire

  2. 40417 Commscope Cable Ties - Bag of 50 (NOS)

    40417 Commscope Cable Ties - Bag of 50 (NOS)

    $19.91

    General Specifications
    Hanger Type: Cable tie
    Color: Black
    Harmonized System (HS) Code: 854420 (Coaxial cable and other coaxial electric conductors)
    Material Type: Engineered plastic
    Ordering Note: CommScope® standard product in Mexico, Central America, and South America
    Package Quantity: 50

    New Old Stock * No longer available for export
    MFR: Commscope
    SKU: 40417

  3. 252026-10KT-P Andrew Angle Adapter with Miniature 5/16" Tapped Hole 10/Pkg (Clamp Only)

    252026-10KT-P Andrew Angle Adapter with Miniature 5/16" Tapped Hole 10/Pkg (Clamp Only)

    $57.91

    Use this clamp to attach to a tower or plate for hanging cable or wire.  See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 252026-10KT-P

    NOTE:  Use the following hardware:
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger clamp  (Rod is 2-1/2") 
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger clamp  (Rod is 6")  
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger clamps  (Rod is 10-5/16") 
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire 
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire 
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire 

  4. SHK-12-2-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    SHK-12-2-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    Double stack
    Includes hardware and angle adapter
    MFR: Andrew / Commscope
    NOTE: SPECIAL ORDER.  LEAD TIME IS 8 WEEKS ARO

     

  5. BH-114 Eupen Butterfly Hanger Kit for 1 1/4" Cable - Hardware Included

    BH-114 Eupen Butterfly Hanger Kit for 1 1/4" Cable - Hardware Included

    BH-114  Butterfly Hanger Kit for 1 1/4" Cable EC6-50 - Hardware Included (10 pcs per kit)

    MFR: Eupen
    SKU: BH-114

     

     

  6. 243951 - Type-N Female Bulkhead Mounting/Grounding Bracket, Andrew

    243951 - Type-N Female Bulkhead Mounting/Grounding Bracket, Andrew

    $40.95

    243951 Adapter Kit, Type-N Female Bulkhead Mounting/Grounding Bracket, MFR: Andrew

  7. TIE15-100 3M™ 15" Black Nylon Cable Ties -100/pkg 120lb Tensile Strength

    TIE15-100 3M™ 15" Black Nylon Cable Ties -100/pkg 120lb Tensile Strength

    $21.91

    TIE15-100 3M™ 15" Black Nylon Cable Ties - 100/pkg 120lb Tensile Strength

    MFR: 3M™ Company
    SKU: INFTIE-15-100  

    See Data Sheet Tab Below

  8. WSDCB12  Mini Cable Block for 1/2" Cable. Supports 2 cable runs.  Wireless Solutions

    WSDCB12 Mini Cable Block for 1/2" Cable. Supports 2 cable runs. Wireless Solutions

    Regular Price: $19.95

    Special Price $15.95

    WSDCB12  Mini Cable Block for 1/2" Cable. Supports 2 cable runs.  MFR: Wireless Solutions.

     

  9. 243095-1 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    243095-1 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    $36.91

    Includes 3/8" Bolts and 7" Rod
    Use with 243684 Angle Clamp and LCLICK series hanger clamps. See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 243095-1  
    NOTE: Use the following hardware
    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

  10. 243095-5 Commscope Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers 10/Pkg (Hardware Only)

    243095-5 Commscope Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers 10/Pkg (Hardware Only)

    $32.91

    Includes 3/8" bolts and 5-1/2" Rod
    Use with 243684 Angle Clamp and LCLICK series hanger clamps. See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 243095-5
    NOTE: Use the following hardware 
    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L4CLICK Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

Items 11 to 20 of 28 total

Page:
  1. 1
  2. 2
  3. 3