Coaxial Cable & Accessories
Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss. Here is more information on Coaxial Cables.
Custom Cables and Custom Cable Assemblies
RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.
Coaxial Cables and Accessories
Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )
|
Waveguide (Elliptical Wavegude)
|
Heliax Specials |
||
RG - Belden Coax Cables |
CNT - Andrew Coax Cables |
||
Rotor Cable |
Coaxial Cable Tools |
|
|
|
|
|
|
|
LMR® is a registered trademark of Times Microwave Systems.
Here is a list of which cables go in which cable groups. PDF
-
30848-4 Andrew Stand-off Adapter with Clamp (NOS)
$48.91 -
31769-1 3/8" x 1" Hardware Kit w/Lockwasher & Nut, 10/Pkg, Andrew
$11.95 As low as: $11.45 -
-
31670-1 CommScope® Adapter Kit for 1" to 2" Round Tower Members (10 per package)
$19.91 As low as: $18.91Use with 294561 Clamp
- Compatible Diameter, maximum 50.8 mm | 2 in
- Compatible Diameter, minimum 25.4 mm | 1 in
- Material Thickness 0.711 mm | 0.028 in
- Material Type Stainless steel
MFR: CommScope
SKU: 31670-1 -
243684 Andrew Compact Stainless Steel Angle Adapter with 3/8" Tapped Hole (Clamp Only) 10pk
$74.91Use this clamp to attach to a tower or plate for hanging cable or wire. See below for matching hardware and hanger clamps. 10 pieces per pack
MFR: Commscope / Andrew
SKU: 243684
Note: Use the following hardware
243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
L4CLICK Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs) -
252026-10KT-P Andrew Angle Adapter with Miniature 5/16" Tapped Hole 10/Pkg (Clamp Only)
$57.91Use this clamp to attach to a tower or plate for hanging cable or wire. See below for matching hardware and hanger clamps.
MFR: Commscope / Andrew
SKU: 252026-10KT-PNOTE: Use the following hardware:
252027-10KT-P 5/16" Rod & hardware for stacking one hanger clamp (Rod is 2-1/2")
252028-10KT-P 5/16" Rod & hardware for stacking two hanger clamp (Rod is 6")
252029-10KT-P 5/16" Rod & hardware for stacking three hanger clamps (Rod is 10-5/16")
68MCLICK Hanger Clamp for 6-8mm Cable or wire
912MCLICK Hanger Clamp for 9-12mm Cable or wire
1316MCLICK Hanger Clamp for 13-16mm Cable or wire -
-
252029-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)
$43.91MFR: Commscope / Andrew
SKU: 252029-10KT-P
Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps. See below.
NOTE: Use the following hardware:
252026-10KT-P Angle Clamp for 5/16" Rod
252027-10KT-P 5/16" Rod & hardware for stacking one hanger kit (Rod is 2-1/2")
252028-10KT-P 5/16" Rod & hardware for stacking two hanger kits (Rod is 6")
68MCLICK Hanger Clamp for 6-8mm Cable or wire
912MCLICK Hanger Clamp for 9-12mm Cable or wire
1316MCLICK Hanger Clamp for 13-16mm Cable or wire -
-
31670-2 CommScope® Adapter Kit for 2" to 3" Round Tower Members (10 per package)
$14.91 As low as: $14.16Use with 249561 Clamp
- Compatible Diameter, maximum 76.2 mm | 3 in
- Compatible Diameter, minimum 50.8 mm | 2 in
- Material Thickness 0.711 mm | 0.028 in
- Material Type Stainless steel
MFR: CommScope
SKU: 31670-2
