1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Not finding what you are searching for. Try a partial part number.

  • Home /
  • Coaxial Cable & Accessories

Coaxial Cable & Accessories

Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss.  Here is more information on Coaxial Cables. 

Custom Cables and Custom Cable Assemblies

RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.

Coaxial Cables and Accessories

Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )

Heliax Type Cable
Heliax

Waveguide (Elliptical Wavegude)

Waveguide

 Heliax Specials
Heliax Specials

LMR- Times Microwave Coax Cables
LMR Cable
RG - Belden Coax Cables
RG Cable
 CNT - Andrew Coax Cables
CNT Cables

RG - Other brand Coax Cables
RG Other Cables

Preassembled Coax Cables
Pre Assembled
Rotor Cable
Rotor Cable
 Coaxial Cable Tools
Cable Tools

Grounding Kits

Grounding Kit

Ground Buss Bars

Ground Buss Bar

Cable Entry Boot

Cable Entry Boot

Hanger Kits

Hanger Kit

Hoisting Grip

Hoisting Grip

Mounting Hardware

Mounting Hardware

LMR® is a registered trademark of Times Microwave Systems.

Here is a list of which cables go in which cable groups. PDF

List  Grid 

per page
Set Ascending Direction
  1. 243095-1 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    243095-1 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    $36.91

    Includes 3/8" Bolts and 7" Rod, works for up to 3 Hanger Clamps
    Use with 243684 Angle Clamp and LCLICK series hanger clamps. See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 243095-1  
    NOTE: Use the following hardware
    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

  2. 243095-5 Commscope Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers 10/Pkg (Hardware Only)

    243095-5 Commscope Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers 10/Pkg (Hardware Only)

    $32.91

    Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers
    Includes 3/8" bolts and 5-1/2" Rod
    Use either 294561 2" Standoff Adapter or 243684 Angle Clamp and LCLICK series hanger clamps.  See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 243095-5
    NOTE: Use the following hardware

    294561  2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters
    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

  3. 243095-9 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    243095-9 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    $32.91

    Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, works for single clamp
    Includes 3/8" bolts and 3-3/4" Rod
    Use either 294561 2" Standoff Adapter or 243684 Angle Clamp and LCLICK series hanger clamps.  See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 243095-9
    NOTE: Use the following hardware
    294561  2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters
    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)
  4. L4CLICK Double Click-on Hanger for 1/2" Coaxial Cable 10/pkg (Clamps Only)

    L4CLICK Double Click-on Hanger for 1/2" Coaxial Cable 10/pkg (Clamps Only)

    $30.91

    Use this hanger clamp with 243684 to attach to a tower or plate for hanging cable or wire. See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: L4CLICK
    NOTE: Use the following hardware
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)
  5. KIT-A Mounting Bracket and Mast Pipe Kit, Radiall / Larsen (NOS)

    KIT-A Mounting Bracket and Mast Pipe Kit, Radiall / Larsen (NOS)

    $24.91

    The bracket and support pipe included in this package is the same included with the GPS0015-C GPS antenna made by Radiall/Larsen.

    • Bracket fits 1" pipe
    • Pipe is 12-5/8" long x 1" outside diameter

    New Old Stock * No longer available for export
    MFR: Radiall/Larsen
    SKU: KIT-A-15-C

  6. TIE15-100 3M™ 15" Black Nylon Cable Ties -100/pkg 120lb Tensile Strength

    TIE15-100 3M™ 15" Black Nylon Cable Ties -100/pkg 120lb Tensile Strength

    $21.91

    TIE15-100 3M™ 15" Black Nylon Cable Ties - 100/pkg 120lb Tensile Strength

    MFR: 3M™ Company
    SKU: INFTIE-15-100  

    See Data Sheet Tab Below

  7. 40417 Commscope Cable Ties - Bag of 50 (NOS)

    40417 Commscope Cable Ties - Bag of 50 (NOS)

    $19.91

    General Specifications
    Hanger Type: Cable tie
    Color: Black
    Harmonized System (HS) Code: 854420 (Coaxial cable and other coaxial electric conductors)
    Material Type: Engineered plastic
    Ordering Note: CommScope® standard product in Mexico, Central America, and South America
    Package Quantity: 50

    New Old Stock * No longer available for export
    MFR: Commscope
    SKU: 40417

  8. 31670-1 CommScope® Adapter Kit for 1" to 2" Round Tower Members (10 per package)

    31670-1 CommScope® Adapter Kit for 1" to 2" Round Tower Members (10 per package)

    $19.91 As low as: $18.91

    Use with 294561 Clamp

    • Compatible Diameter, maximum 50.8 mm   |   2 in
    • Compatible Diameter, minimum 25.4 mm   |   1 in
    • Material Thickness 0.711 mm   |   0.028 in
    • Material Type Stainless steel

    MFR: CommScope
    SKU: 31670-1

  9. 243951 CommScope Type-N Female Bulkhead Mounting/Grounding Bracket

    243951 CommScope Type-N Female Bulkhead Mounting/Grounding Bracket

    $18.91

    Out of stock

    • Surge arrestor accessory 
    • Interface: N Female Bulkhead

    MFR: CommScope
    SKU: 243951-COM

    Data Sheet


  10. 55224-75 Andrew Flange Hardware Kit for MIL-F-3922/59-010 / MIL-F-3922/70-016

    55224-75 Andrew Flange Hardware Kit for MIL-F-3922/59-010 / MIL-F-3922/70-016

    $17.91

    • Waveguide Size : WR75 / WG17 / R120
    • Includes:  4 lock washers / One o-ring / 4 socket head cap screws

    MFR: Andrew / CommScope
    SKU: 55224-75

    Made in the USA

Items 11 to 20 of 24 total

Page:
  2. 1
  3. 2
  4. 3
Shop By

Currently Shopping by:

  1. Category: Mounting Hardware Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Andrew
  2. Andrew / Commscope
  3. Commscope
  4. Commscope / Andrew
  5. RADIALL/LARSEN
Product Categories
Hours of Operation: Monday - Friday 7:30 - 4:00 PST
  • Minimum Order:  Fifteen ($15.00), all inclusive.
  • Preferred Payments for Domestic and International Purchases:  PayPal, VISA, Master Card, American Express, Direct Deposit and Wire Transfer.
  • All checks will be held for clearance.  This process takes 5 - 7 business days.

RF Parts Company
435 S PACIFIC ST
SAN MARCOS, CA, 92078, USA

1-800-RFPARTS (1-800-737-2787)  1-760-744-0700, #1

Buy with confidence



© 1998-2020 RF Parts Company. All Rights Reserved.