Coaxial Cable & Accessories
Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss. Here is more information on Coaxial Cables.
Custom Cables and Custom Cable Assemblies
RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.
Coaxial Cables and Accessories
Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )
|
Waveguide (Elliptical Wavegude)
|
Heliax Specials |
||
RG - Belden Coax Cables |
CNT - Andrew Coax Cables |
||
Rotor Cable |
Coaxial Cable Tools |
|
|
|
|
|
|
|
LMR® is a registered trademark of Times Microwave Systems.
Here is a list of which cables go in which cable groups. PDF
-
KIT-A Mounting Bracket and Mast Pipe Kit, Radiall / Larsen (NOS)
$24.91 -
-
252029-10KT-P Commscope Triple Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)
$41.90MFR: Commscope / Andrew
SKU: 252029-10KT-P
Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps. (For stacking three hanger kits. (Rod is 6.72") See below.
NOTE: Use the following hardware:
252026-10KT-P Angle Clamp for 5/16" Rod
252027-10KT-P 5/16" Rod & hardware for stacking one hanger kit (Rod is 2-1/2")
252028-10KT-P 5/16" Rod & hardware for stacking two hanger kits (Rod is 6")
68MCLICK Hanger Clamp for 6-8mm Cable or wire
912MCLICK Hanger Clamp for 9-12mm Cable or wire
1316MCLICK Hanger Clamp for 13-16mm Cable or wire -
-
31670-2 CommScope® Adapter Kit for 2" to 3" Round Tower Members (10 per package)
$14.90 As low as: $14.16Use with 249561 Clamp
- Compatible Diameter, maximum 76.2 mm | 3 in
- Compatible Diameter, minimum 50.8 mm | 2 in
- Material Thickness 0.711 mm | 0.028 in
- Material Type Stainless steel
MFR: CommScope
SKU: 31670-2 -
-
HG-600T Times Microwave Split Laced Type Hoisting Grip for LMR®600
$30.91 -
-
252028-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)
$37.90Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps. See below.
MFR: Commscope / Andrew
SKU: 252028-10KT-P
NOTE: Use the following hardware:
252026-10KT-P Angle Clamp for 5/16" Rod
252027-10KT-P 5/16" Rod & hardware for stacking one hanger kit (Rod is 2-1/2")
252029-10KT-P 5/16" Rod & hardware for stacking two hanger kits (Rod is 10-5/16")
68MCLICK Hanger Clamp for 6-8mm Cable or wire
912MCLICK Hanger Clamp for 9-12mm Cable or wire
1316MCLICK Hanger Clamp for 13-16mm Cable or wire -
243095-1 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)
$36.90Includes 3/8" Bolts and 7" Rod, works for up to 3 Hanger Clamps
Use with 243684 Angle Clamp and LCLICK series hanger clamps. See below for matching hardware and hanger clamps.
MFR: Commscope / Andrew
SKU: 243095-1
NOTE: Use the following hardware
243684 Angle Clamp Adapter, compact with 3/8 inch tapped hole
243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
L4CLICK Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)
