Coaxial Cable Tools

The RFA-4005-01 Precision Die Set. Hex Cavity dimensions are: .052, .068, .100, .213, .255
Will work on the following cables: RG-58/U, RG-59/U, RG-142/U, RG-223/U, RG-400/U, RG-8X, LMR195, LMR240, Proflex and various video cables.
MFR: RF Industries
SKU: RFA-4005-01

NOTE: Will also work on PALADIN 1300 SERIES.

The RFA-4005-02 Precision Die Set is used to crimp RG-8/U, RG-213/U, RG-214/U, and Belden 9913 cables.
Hex Cavity Dimensions: .100, .128, .429 inch
Die set for Cable Group E, F,  I cables: RG8, 213, 214, 9913, & LMR400 type cables. 
NOTE: Will also work on PALADIN 1300 SERIES.
MFR: RF Industries
SKU:RFA-4005-02

The RFA-4005-08 Precision Die Set. Hex Cavity Dimensions: .324, .255, .068, .042
For Cable Group D & G: RG59/U & 8281
MFR: RF Industries
SKU: RFA-4005-08

The RFA-4005-04 Precision Die Set is used to crimp RG-59-62/U, CP-88, CP-89 cables.
Hex Cavity Dimensions: .239, .068, .319 inch
MFR: RF Industries
SKU: RFA-4005-04

Works in RFA-4005-20 Crimp Handle
MFR: RF Industries
SKU: RFA-4005-21

Crimp Frame without Die Sets
MFR: Amphenol
SKU: 47-10000

For LMR600
No dies included - handle only
Piston Style Crimp Tool
MFR: RF Industries
SKU: RFA-4009-20

The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors ratchet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism.

MFR: RF Industries
SKU: RFA-4005-20

See Die Sets

Crimp Tool for LMR100, 195, 200, 240 Connectors

MFR: Times Microwave
SKU: CT240/200/195/100