Coaxial Cable Tools

• Crimp Die Set for Amphenol handle 47-10000.  
• Hex Cavity Dimensions are .052, .068, .100, .213, .255
• Will work on cable types RG58, RG59, RG142, RG223, RG400, RG8X, LMR195, and LMR240.
• Will also work on RF Industries handle RFA4005-20 and some Paladin models.

MFR: Amphenol
SKU: 47-20025

CS106 Coax Seal adheres to all coax hardware and cable jackets.
Forms and seals over odd shapes
MFR: Universal Electronics * Made in USA
SKU: CS106

The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors ratchet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism.

MFR: RF Industries
SKU: RFA-4005-20

See Die Sets

Contains 3 adjustable blades. 

• Die-cast zinc body
• Adjustable SK-5 blade (Replacement blade kit RFA4087-R14)
• Two or three-step stripping
• 9.25mm to 10.8mm (.364 to .425 inches)
• For RG-8, 11, 213, 214, 9913, 9914, LMR400, LMR400UF
• Perfect for larger coax stripping needs

MFR: RF Industries
SKU: RFA-4087

Replacement blades for CST 195/200, 240, 300, 400, 500 and 600 series stripping tools for Times Microwave LMR cables (5 ea. - 1st cut, 1 ea. 2nd cut)
MFR Part #: 43293 (3192-086 RB-CST)
MFR: Ripley
SKU: RB-CST

This stripping tool works exclusive to RF Industries and Amphenol connectors only.  
NOTE: Will not work on Times Microwave connectors.  See CST400 if using Times Microwave connectors.

Features:
• Ergonomic design
• Cut jacket, braid & dielectric in one step
• Tool steel twin blades in easily replaced cartridges 
• Cartridges configured forspecific LMR-400 cable connectors
• No guesswork 
• Cartridges interchangeable within series

MFR: RF Industries
SKU: RFA-4400-01

Deburs and scrapes Insulation from cable
Great tool to help clean cable for connector installation.
Replacement blade kit (RFA4420RB)
MRF: RF Industries
SKU: RFA-4420

Includes:

• Crimper Tool with Hex Die RFA-4005-02 (.100 inches, .128 inches, .429 inches) in Cardboard Box
• Precision Die Set used to crimp RG-8/U, RG-213/U, Belden 9913 cables. (Shipped without plastic case.)

MFR: RF Industries
SKU: RFA-4005-300

RFA4076-48  7 piece Cable Kit and Rack.  6pcs 48" Cable Assemblies and Mounting Rack. MFR: RF Industries