Coaxial Cable Tools

Specific For LMR400/9913 coax cable. Combo of part number RFA-4005-20 and RFA-4005-14.
You can use other dies on the handle, but this combo is specific for the Popular LMR400/9913/CNT400 Coax Cables.  It will crimp the Ferrule on RG213, RG8, RG214 Coax Cables, but not the center pin.  (Ferrule Only).
MFR: RF Industries
SKU: RFA-4005-314

RFA4076-48  7 piece Cable Kit and Rack.  6pcs 48" Cable Assemblies and Mounting Rack. MFR: RF Industries

The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors ratchet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism.

MFR: RF Industries
SKU: RFA-4005-20

See Die Sets

For RG-8, RG-11 and RG-213 coaxial cable.
Hex Cavity Dimensions: .080, .10, .429
Use with Handle RFA4005-20
MFR: RF Industries
SKU: RFA-4005-10

The RFA-4005-01 Precision Die Set. Hex Cavity dimensions are: .052, .068, .100, .213, .255
Will work on the following cables: RG-58/U, RG-59/U, RG-142/U, RG-223/U, RG-400/U, RG-8X, LMR195, LMR240, Proflex and various video cables.
MFR: RF Industries
SKU: RFA-4005-01

NOTE: Will also work on PALADIN 1300 SERIES.

The RFA-4005-02 Precision Die Set is used to crimp RG-8/U, RG-213/U, RG-214/U, and Belden 9913 cables.
Hex Cavity Dimensions: .100, .128, .429 inch
Die set for Cable Group E, F,  I cables: RG8, 213, 214, 9913, & LMR400 type cables. 
NOTE: Will also work on PALADIN 1300 SERIES.
MFR: RF Industries
SKU:RFA-4005-02

The RFA-4005-04 Precision Die Set is used to crimp RG-59-62/U, CP-88, CP-89 cables.
Hex Cavity Dimensions: .239, .068, .319 inch
MFR: RF Industries
SKU: RFA-4005-04

The RFA-4005-08 Precision Die Set. Hex Cavity Dimensions: .324, .255, .068, .042
For Cable Group D & G: RG59/U & 8281
MFR: RF Industries
SKU: RFA-4005-08

This die size is for LMR400 cable.  The die sizes are for both the center pin and ferrule.
MFR: RF Industries
SKU: RFA-4005-14