Mounting Hardware

General Specifications
Adapter Type: Stand-off adapter
Includes Clamp
Material Type: Stainless steel
Package Quantity: 10

New Old Stock * No longer available for export
MFR: Andrew
SKU: 30848-4

31769-1 3/8" x 1" Hardware Kit w/Lockwasher & Nut, 10/Pkg, Kit for Standard Hangers, includes 3/8 in fillister head bolts and hardware (Nuts &; Lock Washers), 10 pcs/pak

Use with 294561 Clamp

Adapters are 1.13 to 4.5 Inch in Diameter

MFR: Andrew
SKU: 31670-3

Use with 294561 Clamp

• Compatible Diameter, maximum 50.8 mm   |   2 in
• Compatible Diameter, minimum 25.4 mm   |   1 in
• Material Thickness 0.711 mm   |   0.028 in
• Material Type Stainless steel

MFR: CommScope
SKU: 31670-1

Use this clamp to attach to a tower or plate for hanging cable or wire. See below for matching hardware and hanger clamps. 10 pieces per pack
MFR: Commscope / Andrew
SKU: 243684
Note: Use the following hardware
243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

Use this clamp to attach to a tower or plate for hanging cable or wire.  See below for matching hardware and hanger clamps.
MFR: Commscope / Andrew
SKU: 252026-10KT-P

NOTE:  Use the following hardware:
252027-10KT-P  5/16" Rod & hardware for stacking one hanger clamp  (Rod is 2-1/2") 
252028-10KT-P  5/16" Rod & hardware for stacking two hanger clamp  (Rod is 6")  
252029-10KT-P  5/16" Rod & hardware for stacking three hanger clamps  (Rod is 10-5/16") 
68MCLICK  Hanger Clamp for 6-8mm Cable or wire 
912MCLICK  Hanger Clamp for 9-12mm Cable or wire 
1316MCLICK  Hanger Clamp for 13-16mm Cable or wire 

• Surge arrestor accessory 
• Interface: N Female Bulkhead

MFR: CommScope
SKU: 243951-COM

Data Sheet

MFR: Commscope / Andrew
SKU: 252029-10KT-P
Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps.  See below.
NOTE:  Use the following hardware:
252026-10KT-P  Angle Clamp for 5/16" Rod 
252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
68MCLICK  Hanger Clamp for 6-8mm Cable or wire
912MCLICK  Hanger Clamp for 9-12mm Cable or wire
1316MCLICK  Hanger Clamp for 13-16mm Cable or wire 

Universal Angle Adapter Kit with 3/4" Hole (Snap-Ins), 10/Pkg
MFR: CommScope
SKU: UA-3