Accessories

31769-1 3/8" x 1" Hardware Kit w/Lockwasher & Nut, 10/Pkg, Kit for Standard Hangers, includes 3/8 in fillister head bolts and hardware (Nuts &; Lock Washers), 10 pcs/pak

WSDCB12  Mini Cable Block for 1/2" Cable. Supports 2 cable runs.  MFR: Wireless Solutions.

SSHAK-3812 Stackable Snap-In Hanger Kit for 3/8" RET Cables, 10/Pkg

MFR: Andrew / Commscope
SKU: SSHAK-3812

• Attach Without Hardware - Standard Snap-In and SnapStak™ stackable hanger kits offer quick and easy attachment of coaxial cable in all types of weather.
• The hangers snap directly into 3/4" holes in tower support structures 0.120 to 0.150 inch thick. The heavy gauge stainless steel construction provides excellent corrosion resistance for long-term reliability.
• SnapStak™ hangers can be stacked up to three deep when using 1/2" and 7/8" coax and up to two deep when using 1-1/4" or 1-5/8" coax.
• The maximum recommended spacing listed are for standard conditions of 125 mph survival wind velocity and 1/2" radial ice.

MFR: Commscope
SKU: SSH-12

Single stack
Includes hardware and angle adapter
MFR: Andrew / Commscope
SKU: SHK-12-1-P

Hanger clamp for 2 cables.  Use with 252026-10KT-P Angle clamp and 5/16" Rod & Hardware kit.  See options below.
MFR: Andrew/CommScope
SKU: 68MCLICK
NOTE:  Use the following hardware:
252026-10KT-P  Angle Adapter, miniature, (5/16") tapped hole, 10pk (Clamp Only)
252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
252029-10KT-P  5/16" Rod & hardware for stacking three hanger kits  (Rod is 10-5/16")
68MCLICK  Hanger Clamp for 6-8mm Cable or wire
912MCLICK  Hanger Clamp for 9-12mm Cable or wire
1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

Hanger clamp for 2 cables.  Use with 252026-10KT-P Angle clamp and 5/16" Rod & Hardware kit.  See options below.
MFR: Andrew/CommScope
SKU: 912MCLICK
NOTE:  Use the following hardware:
252026-10KT-P  Angle Adapter, miniature, (5/16") tapped hole, 10pk (Clamp Only)
252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
252029-10KT-P  5/16" Rod & hardware for stacking three hanger kits  (Rod is 10-5/16")
68MCLICK  Hanger Clamp for 6-8mm Cable or wire
1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

Hanger clamp for 2 cables.  Use with 252026-10KT-P Angle clamp and 5/16" Rod & Hardware kit.  See options below.
NOTE: Hardware Sold Separately
MFR: Andrew/CommScope
SKU: 1316MCLICK
NOTE:  Use the following hardware:
252026-10KT-P  Angle Adapter, miniature, (5/16") tapped hole, 10pk (Clamp Only)
252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
252029-10KT-P  5/16" Rod & hardware for stacking three hanger kits  (Rod is 10-5/16")
68MCLICK  Hanger Clamp for 6-8mm Cable or wire
912MCLICK  Hanger Clamp for 9-12mm Cable or wire

42396A-2  Butterfly Hanger for 1-5/8 in coaxial cable(10pcs per pack), MFR: Andrew / Commscope