Connectors - Heliax Type (Andrew-Commscope/ RFS-Cablewave/ Eupen)

F1TDF 7/16 Din Female For FSJ1

AL7E78-PS 7/8 in EIA Flange Positive Stop™ for 1-5/8 in AVA7-50, AL7-50 and LDF7-50A coaxial cable, MFR: Andrew / Commscope

• Connector Impedance: 50 ohm
• Operating Frequency Band: 0 – 3300 MHz
• Shielding Effectiveness: -130 dB
• Outer Contact Plating: Trimetal
• Inner Contact Plating: Silver

MFR: Andrew
SKU: L6TDM-PS

Includes butyl rubber tape and PVC tape
For 1/4"-1-5/8" Heliax
MFR: Andrew
NSN: 5970-01-425-7058
SKU: 221213

Body Style: Straight
Cable Family: LDF4.5-50
Inner Contact Attachment Method: Captivated
Inner Contact Plating: Gold
Interface: N Male
Mounting Angle: Straight
Outer Contact Attachment Method: Self-flare
Outer Contact Plating: Trimetal
Pressurizable: No

MFR: Commscope - Made in China
SKU: L4.5PNM-RC

See Data Sheet

NOTE: No longer produced by Commscope/ Andrew.  You can substitute the NM50V58

Type N Female RingFlare™ for 5/8" Heliax Cable LDF4.5-50,

MFR: Andrew / Commscope

SKU: L4.5PNF-RC 

NOTE: No longer produced by Commscope/ Andrew.  You can substitute the NF50V58

For cable types: FSJ2-50
Ohms: 50 
Body: Nickel
Center Pin: Gold 
Dielectric: PTFE

MFR: Andrew/Commscope
SKU: F2PNF-BH

NOTE:  The F2PNF-BH is no longer available from the factory.  We have some pre-made cable assemblies with this connector installed.  We are offering them on special.  Each cable has an additional connector installed on the other side.  You can remove this connector and install any available connector for this cable.  See "We also Recommend" in our information section.  These cables are available in stock.

Type-N Female Connector, FSJ2-50, Straight Heliax Cable
MFR: Andrew/CommScope
SKU: F2PNF-C

Connector 7/16 DIN Male, Straight Hex Nut, FSJ2-50 Heliax Cable
MFR: Andrew/CommScope
SKU: F2TDM-PL