Henry 3000D Radio Frequency Power Generator

The 3CX3000A7 high-mu forced air cooled power triode provides relatively high power output as an amplifier, oscillator, or modulator at low plate voltages. The tube has a low inductance cylindrical filament tank circuit for VHF operation. Operation with zero grid bias in many applications offers circuit simplicity by eliminating the bias supply. Grounded-grid operation is attractive since a power gain of over twenty times can be obtained.

Limited One Year Warranty on workmanship and material.
MFR: Made in the USA, Rebuilt by RF Parts Company
Not available for export or EXPORTERS
SKU: 3CX3000A7-RFPR

HENRY 3000D Radio Frequency Power Generators, rated at 3000 Watts Continuous Output on 13.56 MHz

We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years.  They were removed from service at "Applied Materials".   The Henrys as a whole and the parts therein, are in good condition.  Each unit is tested and evaluated by our Chief RF Engineer, W6NQ.

• Eimac 3CX3000A7 tube. 
• Full Bird Dual Slug Wattmeter setup with forward and reflected power. 
• Three Phase 208/240 V input.
• Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.

• Power requirement: 40 Amps

Please send an email to customerservice@rfparts for any questions that you may have.

Weight 600 lbs.  (Local Pickup or Truck Freight)

FOB San Marcos, CA 

MFR: Henry Radio Electronics, California

Not available for export   Limited Warranty

ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier

This transformer was removed from a working Henry 3000D Amplifier from the Henry Radio Industrial Division.  

Like new and in excellent condtion

Size: 4-3/8" Long x 5 1/4" High x 4" wide, Weight: 13.85 lbs

Not available for Export

ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va MFR: ECA - Anaheim

This transformer was removed from a working Henry 3000D RF Power Generator amplifier.  In excellent condtion - Like New.

Size: 4-3/8" Long x 5-3/8" High x 5" wide, Weight: 17.45 lbs

Made in USA, Limited Quantity Available, Not Available for Export

ECA5024 Swinging Choke Transformer, 15-8 Henry, 1.5A Continuous (Removed from Henry 3000D), MFR: ECA

This High Voltage Choke Transformer was removed from a working Henry 3000D RF Power Generator Amplifier. 

It is in like-new, excellent condtion

Size: 5.5" Long x 6-1/2" High x 8" wide, Weight: 46 lbs

Limited Quantity Available  No longer available for Export

HENRY-CIRCUITPANEL  3000D Henry Electronics Circuit Breaker Panel from a 3000D RF Power Generator.

ECA26028 High Voltage Transformer, 208/230vac 3 Phase, Primary, 6000vac 3amp Secondary, Removed from Henry Electronics 3000D

This transformer was removed from a working Henry 3000D RF Power Generator.  In excellent condtion - Like New.
Size: 12" Long x 8" High x 10" wide, Weight: 120 lbs  (Must ship by Truck Freight)
Made in USA, Limited Quantity Available, Not Available for Export

HENRY-METERPANEL  3000D Henry Electronics Meter Panel from a 3000D Power Generator.

3000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator

RF Deck removed from Henry Electronics RF Power Generator 3000D.  The Eimac 3CX3000A7 tube is not included. The RF Deck is rated at 3000 Watts Continuous Output on 13.56 MHz. Please send an email to rfp@rfparts.com for an explanation of our Terms of Warranty.

The deck consists of the following items:

• Case with Grid current adjuster (PA Load) and Tune adjuster (PA Tune)
• Tube socket and chimney for 3CX3000A7 tube (Tube not included)  See 3CX3000A7
• Plate choke assembly
• Line Section w/ elements
• See HENRY "2000 WATT SECTION" diagram below:

 MFR: Henry Electronics, USA

Limtied Quantity Available Not for Export