Henry 3000D Radio Frequency Power Generator

• Rebuit with an Eimac core
• Filament: Thoriated Tungsten
• Voltage: 7.5 Volts
• Current @ 7.5 Volts: 51.5 Amps

Rebuilt * No longer available for export
MFR: RF Parts Company
SKU: 3CX3000A7-RFPR

Data Sheet

This rebuilt tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Ninety Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.

HENRY 3000D Radio Frequency Power Generators Rated at 3000 Watts Continuous Output on 13.56 MHz

We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years.  They were removed from service at "Applied Materials".   The Henrys as a whole and the parts therein, are in good condition.  Each unit is tested and evaluated by our Chief RF Engineer, W6NQ.

• Eimac 3CX3000A7 tube. 
• Full Bird Dual Slug Wattmeter setup with forward and reflected power. 
• Three Phase 208/240 V input.
• Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.

• Power requirement: 40 Amps

Please send an email to customerservice@rfparts for any questions that you may have.

Weight 600 lbs.  (Local Pickup or Truck Freight)

FOB San Marcos, CA 

MFR: Henry Radio Electronics, California

Not available for export   Limited Warranty

ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier
This transformer was removed from a working Henry 3000D Amplifier from the Henry Radio Industrial Division.  
Size: 4-3/8" Long x 5 1/4" High x 4" wide, Weight: 13.85 lbs
Excellent condtion * No longer available for export
SKU: ECA1102

ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va MFR: ECA - Anaheim

This transformer was removed from a working Henry 3000D RF Power Generator amplifier.  In excellent condtion - Like New.

Size: 4-3/8" Long x 5-3/8" High x 5" wide, Weight: 17.45 lbs

Made in USA, Limited Quantity Available, Not Available for Export

Axial Fan removed from Henry Electronics 3000D RF Power Generator Amplifier. This Fan is in Like New condition. Screen included.
Used * No longer available for export
MRF: Comair Rotron * Assembled in Mexico
SKU: CL2L2

• Uses two MRF422 150 Watt Transistors

Clean Pull * No longer available for export
MFR: Henry Electronics
SKU: 9600-0200-P

Dynamically balanced, the Dayton 4C446 Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures.

• Speed 3160 RPM
• CFM @ 0.000-In SP: 148
• Voltage 115 Volts AC

New Old Stock * No longer available for export
MFR: Dayton
SKU: 4C446

• Resistance: 1 kOhms
• Element Type: Wirewound
• Shaft Type: Slotted
• Tolerance: 5 %

Used * Pulled from Henry 3000D Generator * No longer available for export
MFR: Bourns
Made in Mexico
SKU: 3540S-1-102-P

Data Sheet

• Lighted Button
• Momentary action
• .015 to 1 amp
• 30 vdc or 125vac (max)

Used * Pulled from Henry 3000D Generator * No Longfer available for export
MFR: Dailight
SKU: 554-1221-211-P

Data Sheet