VINTAGE
Vintage: RF Parts Company has more than 20,000 sq. ft. of VINTAGE Communications Equipment and Electronic Parts. Due to the enormous volume of our inventory, much of it is not listed on our www.rfparts.com website (we have been uploading our inventory as time allows, since 1992. Please send an email to rfp@rfparts.com or call 1-800-RFPARTS (1-800-737-2787) to check availability and pricing.
-
30' LMR®400 Cable Assembly with Type-N Male Connectors
$94.91 -
252029-10KT-P Commscope Triple Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)
$41.90MFR: Commscope / Andrew
SKU: 252029-10KT-P
Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps. (For stacking three hanger kits. (Rod is 6.72") See below.
NOTE: Use the following hardware:
252026-10KT-P Angle Clamp for 5/16" Rod
252027-10KT-P 5/16" Rod & hardware for stacking one hanger kit (Rod is 2-1/2")
252028-10KT-P 5/16" Rod & hardware for stacking two hanger kits (Rod is 6")
68MCLICK Hanger Clamp for 6-8mm Cable or wire
912MCLICK Hanger Clamp for 9-12mm Cable or wire
1316MCLICK Hanger Clamp for 13-16mm Cable or wire -
CTB-15 DSG-CANUSA Self-Fusing Tape
$17.91EPR based self fusing tape designed to protect connectors used in the communications industry
- Provides protection where heat/flame is prohibited
- Covers any shape including high transition areas and elbows
- Clean strippable
- Layers fuse together to form a boot that provides complete environmental protection and insulation
- UV and ozone resistant
- Proven long term protection
- Environmental protection of connectors in tight locations or when torch is not permitted
- Protect connectors in Cable TV, Wireless and Telecom applications
MFR: DSG - CANUSA
SKU: CTB-15 TAPE
See Data Sheet Tab Bleow -
-
Henry 3000D Radio Frequency Power Generators from Henry Electronics
$2,789.90HENRY 3000D Radio Frequency Power Generators Rated at 3000 Watts Continuous Output on 13.56 MHz
We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years. They were removed from service at "Applied Materials". The Henrys as a whole and the parts therein, are in good condition.
- Eimac 3CX3000A7 tube.
- Full Bird Dual Slug Wattmeter setup with forward and reflected power.
- Three Phase 208/240 V input.
- Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
- Power requirement: 40 Amps
Please send an email to customerservice@rfparts for any questions that you may have.
Weight 600 lbs. (Local Pickup or Truck Freight)
FOB San Marcos, CA
MFR: Henry Radio Electronics, California
Not available for export Limited Warranty
Made in the USA -
SFX-DMDM-10 CommScope 10 ft SFX-500 W/7/16 DIN Male Connectors
Regular Price: $84.95
Special Price $44.95
-
SFX-DMDM-20 CommScope 20 ft SFX-500 W-7/16 DIN Male Connectors
Regular Price: $99.95
Special Price $59.95
-
-
10' LMR®400 Cable Assembly with RFN1006-I Type-N Male Connectors
$56.91 -
243684 Andrew Compact Stainless Steel Angle Adapter with 3/8" Tapped Hole (Clamp Only) 10pk
$74.91Use this clamp to attach to a tower or plate for hanging cable or wire. See below for matching hardware and hanger clamps. 10 pieces per pack
MFR: Commscope / Andrew
SKU: 243684
Note: Use the following hardware
243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
L4CLICK Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)
