Tools

Cable Group: I
Cable Types: LMR400, CNT400
MFR: RF Industries
SKU: VT500

Ratcheting Hand Crimp Tool for LMR^®500/LMR^®600
MFR: Amphenol
SKU: 47021

LMR^® is a registered trademark of Times Microwave Systems.

The RFA-4005-01 Precision Die Set. Hex Cavity dimensions are: .052, .068, .100, .213, .255
Will work on the following cables: RG-58/U, RG-59/U, RG-142/U, RG-223/U, RG-400/U, RG-8X, LMR195, LMR240, Proflex and various video cables.
MFR: RF Industries
SKU: RFA-4005-01

NOTE: Will also work on PALADIN 1300 SERIES.

The RFA-4005-02 Precision Die Set is used to crimp RG-8/U, RG-213/U, RG-214/U, and Belden 9913 cables.
Hex Cavity Dimensions: .100, .128, .429 inch
Die set for Cable Group E, F,  I cables: RG8, 213, 214, 9913, & LMR400 type cables. 
NOTE: Will also work on PALADIN 1300 SERIES.
MFR: RF Industries
SKU:RFA-4005-02

The RFA-4005-04 Precision Die Set is used to crimp RG-59-62/U, CP-88, CP-89 cables.
Hex Cavity Dimensions: .239, .068, .319 inch
MFR: RF Industries
SKU: RFA-4005-04

The RFA-4005-08 Precision Die Set. Hex Cavity Dimensions: .324, .255, .068, .042
For Cable Group D & G: RG59/U & 8281
MFR: RF Industries
SKU: RFA-4005-08

For Cable Group B, RG316, RG174
MFR: RF Inudtries
SKU: RFA-4005-09

This die size is for LMR400 cable.  The die sizes are for both the center pin and ferrule.
MFR: RF Industries
SKU: RFA-4005-14

Die set for Cable Group C
RG58/U & Use with RFA-4005-20
MFR: RF Industries
SKU: RFA-4005-07