Crimper Kits / Handle-Die Sets

Specific For LMR^®400/9913 coax cable. Combo of part number RFA-4005-20 and RFA-4005-14.
You can use other dies on the handle, but this combo is specific for the Popular LMR^®400/9913/CNT400 Coax Cables.  It will crimp the Ferrule on RG213, RG8, RG214 Coax Cables, but not the center pin.  (Ferrule Only).
MFR: RF Industries
SKU: RFA-4005-314

LMR^® is a registered trademark of Times Microwave Systems.

With 6 dies (LMR100 to LMR600)

RFA-4009-20 —Professional grade crimp tool handle
RFA-4009-01 — Professional grade coaxial die hex cavity: .610"
RFA-4009-02 — Professional grade coaxial die hex cavities: .042", 0.68", .255"
RFA-4009-03 — Professional grade coaxial die hex cavities: 0.42", .068", .255"
RFA-4009-04 — Professional grade coaxial die hex cavities: .068", .130", .178"
RFA-4009-05 — Professional grade coaxial die hex cavities: .100", .118", .429"
RFA-4009-06 — Professional grade coaxial die hex cavities: .068", .100", .213" 

MFR: RF Industries
SKU: RFA-4009-200

Includes:

• The heavy duty professional grade piston-action crimper for installing large diameter ferrules (LMR600/LMR400). 
• The RFA-4009-01 die for ferrules of .6 diameter
• The RFA-4009-02 die for ferrules of .429 diameter

MFR: RF Industries
SKU: RFA-4009

This kit contains the RFA-4005-20 crimp handle, the RFA-4087 coaxial stripper and ten interchangeable die-sets with hex cavities ranging from 0.042” to 0.429” across the flats. This assortment will crimp most coaxial connectors and contacts. All are contained in a rugged, foam-lined case.

MFR: RF Industries
SKU: RFA-4005-520

The RFA-4005-501 is supplied with one RFA-4005-20 crimping tool frame and six die sets. The RFA-4005-501 includes the following dies:
RFA-4005-01, -02, -05, -06, -07, &  -10.

NOTE: CAN BE USED IN INDUSTRIAL APPLICATIONS.
MFR: RF Industries
SKU: RFA-4005-501

The RFA-4005 is supplied with one RFA-4005-20 crimping tool frame and two die sets, the RFA-4005-01 and the RFA-4005-02. All contained in a durable, padded, self-storage case.

MFR: RF Industries
SKU: RFA-4005

Hex Cavity Dimensions are .118, .429
Will work on cable Group I for both Ferrule and center pin. 
Will work on Cable Group E & F for Ferrule
Cable Types: LMR400, 9913 (Cable Group I), and RG8, RG213, RG393, RG214 (Cable Group E & F)
MFR: Amphenol
SKU: 47-10210

1505 - Complete Crimping tool Kit

Complete kit with 1 Handle, 5 dies, stripping tool, cutting tool and screw driver.
MFR: Made in CHINA

Complete Tool Kit for CompPro® Compression Type-N Male & TNC Male Connector Assemblies
Cable Group I, LMR400, CNT400
MFR: RF Industries
SKU: KIT400NT

100% machined Aluminium
T-Insertion Tool 2-1/2" Overall length. 
Used to install COMP-NM-400 and COMP-TM-400Cable Group: I
Cable Types: LMR400, CNT400
MFR: RF Industries
SKU: IT50TA