Tools
Please choose from the following TOOL Sub-Catagory choices:
NOTE: ALL TOOLS / HARDWARE ARE NON-RETURNABLE. IF YOU HAVE QUESTIONS ON PURCHASING THE CORRECT ITEM. PLEASE CONTACT CUSTOMER SERVICE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-
RFA-4006-500 RF Industries Master Crimp Kit with 2 Handles and 22 Dies
$591.91The RFA-4006-500 kit contains two RFA-4005-20 crimp handles and seventeen interchangeable die sets in one convenient, foam-lined plastic case. With on kit you can crimp terminials and coaxial cable from RG174/U to LMR400. This is the most complete kit offered, and is sure to be a popular one for installers, field techincians and production floor use.
Includes:
- 2 RFA-4005-20 Handles
- 7 Dies for crimping insulated and non-insulated terminals
- 10 Dies for crimping coaxial cable ranging from RG-174/u to LMR-400 sizes
- In foam lined plastic case.
MFR: RF Industries
SKU: RFA4006-500 -
RFA-4005 RF Industries Crimping Tool Kit in Hard Case
$164.91 -
RFA-4005-501 RF Industries Crimping Tool Kit with 6 Dies and Hard Case
$229.91 -
RFA-4009 RF Industries Heavy Duty Crimp Handle and Die Kit
$494.91 -
RFA-4005-314 RF Industries Crimp Handle/Die Combo Set for LMR®400 Cable
$88.91Specific For LMR®400/9913 coax cable. Combo of part number RFA-4005-20 and RFA-4005-14.
You can use other dies on the handle, but this combo is specific for the Popular LMR®400/9913/CNT400 Coax Cables. It will crimp the Ferrule on RG213, RG8, RG214 Coax Cables, but not the center pin. (Ferrule Only).
MFR: RF Industries
SKU: RFA-4005-314LMR® is a registered trademark of Times Microwave Systems.
