Tools
Please choose from the following TOOL Sub-Catagory choices:
NOTE: ALL TOOLS / HARDWARE ARE NON-RETURNABLE. IF YOU HAVE QUESTIONS ON PURCHASING THE CORRECT ITEM. PLEASE CONTACT CUSTOMER SERVICE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-
-
MCPT-3812 - Manual Cable Prep Tool for 3/8" & 1/2" Heliax, Andrew
$35.91 -
MCPT-78 Andrew Manual Cable Prep Tool for 7/8" Heliax Cable
$40.91 -
RFA-4087 RF Industries Stripping Tool for RFI / Amphenol Connectors
$59.91Contains 3 adjustable blades.
- Die-cast zinc body
- Adjustable SK-5 blade (Replacement blade kit RFA4087-R14)
- Two or three-step stripping
- 9.25mm to 10.8mm (.364 to .425 inches)
- For RG-8, 11, 213, 214, 9913, 9914, LMR400, LMR400UF
- Perfect for larger coax stripping needs
MFR: RF Industries
SKU: RFA-4087 -
MCPT-L4 Andrew Manual Cable Prep Tool for LDF4-50A Heliax Cable
$38.91 -
RFA-4400-01 RF Industries Stripping Tool for LMR®400 Type Cable
$53.91 As low as: $51.21This stripping tool works exclusive to RF Industries and Amphenol connectors only.
NOTE: Will not work on Times Microwave connectors. See CST400 if using Times Microwave connectors.Features:
• Ergonomic design
• Cut jacket, braid & dielectric in one step
• Tool steel twin blades in easily replaced cartridges
• Cartridges configured forspecific LMR®-400 cable connectors
• No guesswork
• Cartridges interchangeable within seriesMFR: RF Industries
SKU: RFA-4400-01LMR® is a registered trademark of Times Microwave Systems.
-
78-HPT Andrew Manual Prep Tool for 7/8" EZFIT Connectors For AVA5-50 Heliax Cable
$206.91For use with 7/8" EZFIT connectors. You can use this tool for FXL780 and AVA5-50FX cable
Tool Type: Manual Cable Prepartion Tool
Includes: One AVA5-50 Tool Bit | One Cutting Tool Body | One FXL-780 Tool Bit | One Hex Wrench | Ten Saw Guides
Application: Prepares Cables for Connector Attachment
Material Type: Blade Hardened Tool Steel
Material Type: Body Engineered Plastic
Cutting Blade Life: 150 Cable Preparations
Combination Blades Included: 2
Jacket Blades Included: 1
Nominal size: 7/8 in.
Shipping weight: 0.59 lbs.
Weight: 0.59 lbsMFR: Andrew / Commscope
SKU: 78HPT -
SDT400-50 RF Industries Stripping Tool for CompPro Connectors and Cable Group I
$88.91RF Industries cable stripper tool strips 50 Ohm coaxial cable for preparing CompPro® 400 size connectors. The coax stripper provides one-step preparation for drop cables. Cassette blades that require no adjustment removes the proper length of jacket to meet SCTE and Bellcore specifications.
Ripley cable stripper is made of high-visibility red polymer that makes to difficult to lose this strip tool in your tool box. Replacement blade kit is also available: RC400-50Cable Types: LMR400, CNT400
MFR: RF Industries
SKU: SDT400-50 -
-
EUTK158 Mini Tool Kit for 1-5/8" Eupen Cable and connectors, Eupen
$569.95
