Stripping Tools - Manual

You can use this tool for FXL780 and AVA5-50FX cable

Tool Type: Manual Cable Prepartion Tool
Includes: One AVA5-50 Tool Bit | One Cutting Tool Body | One FXL-780 Tool Bit | One Hex Wrench | Ten Saw Guides
Application: Prepares Cables for Connector Attachment
Material Type: Blade Hardened Tool Steel
Material Type: Body Engineered Plastic
Cutting Blade Life: 150 Cable Preparations
Combination Blades Included: 2
Jacket Blades Included: 1
Nominal size: 7/8 in.
Shipping weight: 0.59 lbs.
Weight: 0.59 lbs

MFR: Andrew / Commscope
SKU: 78HPT

MCPT-A5-D  Manual Cable Preparation Tool for 7/8 in coaxial cable and A5 Connectors

• Tool Type: Manual cable preparation tool
• Application: Prepares cable for connector attachment
• Cutting Blade Life:  500 cable preparations

MFR: Andrew / Commscope
SKU: MCPT-A5-D

• TWO STEP  tool for preparing standard Times Microwave 600 LMR coax cables

MFR: Ripley
SKU: CST600

NOTE: For Times Microwave Connectors Only.

CST-400  All-In-One Combination Cable Prep Tool for LMR-400 Coax, will work on Crimp and Clamp connectors made by Times Microwave only. 

MFR: Ripley for Times Microwave.
SKU: CST-400

All-In-One Combination Cable Prep Tool for LMR-240 Cable

NOTE: WORKS FOR TIMES MICROWAVE CONNECTORS ONLY.

MFR: Times Microwave
SKU: CST240A

Can to be used on CommScope P1, P3 Cable Guard Cable; Times Fiber T4, T6, T10 Cable; Alcatel Cable Benelux - ACE Cable

• Manual or drill operation
• Combination stripping and coring tool
• Heat treated sheath cutting blade
• Spiral-fluted, heat treated steel coring bit
• Rugged, durable all metal construction

MFR: Ripley Company
SKU: CST-500

RF Industries cable stripper tool strips 50 Ohm coaxial cable for preparing CompPro® 400 size connectors. The coax stripper provides one-step preparation for drop cables. Cassette blades that require no adjustment removes the proper length of jacket to meet SCTE and Bellcore specifications.

Ripley cable stripper is made of high-visibility red polymer that makes to difficult to lose this strip tool in your tool box. Replacement blade kit is also available: RC400-50

Cable Types: LMR400, CNT400

MFR: RF Industries
SKU: SDT400-50

This stripping tool works exclusive to RF Industries and Amphenol connectors only.  
NOTE: Will not work on Times Microwave connectors.  See CST400 if using Times Microwave connectors.

Features:
• Ergonomic design
• Cut jacket, braid & dielectric in one step
• Tool steel twin blades in easily replaced cartridges 
• Cartridges configured forspecific LMR-400 cable connectors
• No guesswork 
• Cartridges interchangeable within series

MFR: RF Industries
SKU: RFA-4400-01

Contains 3 adjustable blades. 

• Die-cast zinc body
• Adjustable SK-5 blade (Replacement blade kit RFA4087-R14)
• Two or three-step stripping
• 9.25mm to 10.8mm (.364 to .425 inches)
• For RG-8, 11, 213, 214, 9913, 9914, LMR400, LMR400UF
• Perfect for larger coax stripping needs

MFR: RF Industries
SKU: RFA-4087