1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Not finding what you are searching for. Try a partial part number.

  • Home /
  • Coaxial Cable & Accessories

Coaxial Cable & Accessories

Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss.  Here is more information on Coaxial Cables. 

Custom Cables and Custom Cable Assemblies

RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.

Coaxial Cables and Accessories

Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )

Heliax Type Cable
Heliax

Waveguide (Elliptical Wavegude)

Waveguide

 Heliax Specials
Heliax Specials

LMR- Times Microwave Coax Cables
LMR Cable
RG - Belden Coax Cables
RG Cable
 CNT - Andrew Coax Cables
CNT Cables

RG - Other brand Coax Cables
RG Other Cables

Preassembled Coax Cables
Pre Assembled
Rotor Cable
Rotor Cable
 Coaxial Cable Tools
Cable Tools

Grounding Kits

Grounding Kit

Ground Buss Bars

Ground Buss Bar

Cable Entry Boot

Cable Entry Boot

Hanger Kits

Hanger Kit

Hoisting Grip

Hoisting Grip

Mounting Hardware

Mounting Hardware

LMR® is a registered trademark of Times Microwave Systems.

Here is a list of which cables go in which cable groups. PDF

List  Grid 

per page
Set Ascending Direction
  1. 31768A Angle Adapter, standard, 3/8 in tapped hole

    31768A Angle Adapter, standard, 3/8 in tapped hole

    $115.91 As low as: $105.81

    31768A  Angle Adapter, standard, 3/8 in tapped hole, MFR: Commscope / Andrew

  2. UA-3 CommScope Universal Angle Adapter Kit with 3/4" Hole (Snap-Ins), 10/Pkg

    UA-3 CommScope Universal Angle Adapter Kit with 3/4" Hole (Snap-Ins), 10/Pkg

    $112.91

    Universal Angle Adapter Kit with 3/4" Hole (Snap-Ins), 10/Pkg
    MFR: CommScope
    SKU: UA-3

  3. 243684 Andrew Compact Stainless Steel Angle Adapter with 3/8" Tapped Hole (Clamp Only) 10pk

    243684 Andrew Compact Stainless Steel Angle Adapter with 3/8" Tapped Hole (Clamp Only) 10pk

    $74.91

    Use this clamp to attach to a tower or plate for hanging cable or wire. See below for matching hardware and hanger clamps. 10 pieces per pack
    MFR: Commscope / Andrew
    SKU: 243684
    Note: Use the following hardware
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

  4. 294561 CommScope I-Line 2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters 10/Pkg

    294561 CommScope I-Line 2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters 10/Pkg

    $60.91

    I-Line 2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters, 10/Pkg

    Use with Hose Clamp 31670-1 , 31670-2 , or 31670-3 for Round Member Rohn Towers

    Recommended hardware choices to use with 294561

    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)
    43211A Butterfly Hanger for 1/2 in coaxial cableLDF4-50A
    42396A-5  Butterfly Hanger for 7/8 in coaxial cable, AVA5-50

    MFR: CommScope
    SKU: 294561

  5. 252026-10KT-P Andrew Angle Adapter with Miniature 5/16" Tapped Hole 10/Pkg (Clamp Only)

    252026-10KT-P Andrew Angle Adapter with Miniature 5/16" Tapped Hole 10/Pkg (Clamp Only)

    $57.91

    Use this clamp to attach to a tower or plate for hanging cable or wire.  See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 252026-10KT-P

    NOTE:  Use the following hardware:
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger clamp  (Rod is 2-1/2") 
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger clamp  (Rod is 6")  
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger clamps  (Rod is 10-5/16") 
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire 
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire 
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire 

  6. 30848-4 Andrew Stand-off Adapter with Clamp (NOS)

    30848-4 Andrew Stand-off Adapter with Clamp (NOS)

    $48.91

    General Specifications
    Adapter Type: Stand-off adapter
    Includes Clamp
    Material Type: Stainless steel
    Package Quantity: 10

    New Old Stock * No longer available for export
    MFR: Andrew
    SKU: 30848-4

     

  7. 252029-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    252029-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    $43.91

    MFR: Commscope / Andrew
    SKU: 252029-10KT-P
    Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps.  See below.
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Clamp for 5/16" Rod 
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire 

  8. 243950 Andrew 7/16 DIN Female Bulkhead Mounting/Grounding Bracket

    243950 Andrew 7/16 DIN Female Bulkhead Mounting/Grounding Bracket

    $42.95

    243950  Andrew Adapter Kit 7/16 DIN Female Bulkhead Mounting/Grounding Bracket

  9. 252028-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    252028-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    $41.91

    Out of stock

    Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps.  See below.
    MFR: Commscope / Andrew
    SKU: 252028-10KT-P
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Clamp for 5/16" Rod 
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
    252029-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

  10. 252027-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    252027-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    $39.91

    Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps.  See below.
    MFR: Commscope
    SKU: 252027-10KT-P 
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Clamp for 5/16" Rod 
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger clamps  (Rod is 6")
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger clamps  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

Items 1 to 10 of 24 total

Page:
  1. 1
  2. 2
  3. 3
Shop By

Currently Shopping by:

  1. Category: Mounting Hardware Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Andrew
  2. Andrew / Commscope
  3. Commscope
  4. Commscope / Andrew
  5. RADIALL/LARSEN
Product Categories
Hours of Operation: Monday - Friday 7:30 - 4:00 PST
  • Minimum Order:  Fifteen ($15.00), all inclusive.
  • Preferred Payments for Domestic and International Purchases:  PayPal, VISA, Master Card, American Express, Direct Deposit and Wire Transfer.
  • All checks will be held for clearance.  This process takes 5 - 7 business days.

RF Parts Company
435 S PACIFIC ST
SAN MARCOS, CA, 92078, USA

1-800-RFPARTS (1-800-737-2787)  1-760-744-0700, #1

Buy with confidence



© 1998-2020 RF Parts Company. All Rights Reserved.