1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Not finding what you are searching for. Try a partial part number.

  • Home /
  • Coaxial Cable & Accessories

Coaxial Cable & Accessories

Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss.  Here is more information on Coaxial Cables. 

Custom Cables and Custom Cable Assemblies

RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.

Coaxial Cables and Accessories

Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )

Heliax Type Cable
Heliax

Waveguide (Elliptical Wavegude)

Waveguide

 Heliax Specials
Heliax Specials

LMR- Times Microwave Coax Cables
LMR Cable
RG - Belden Coax Cables
RG Cable
 CNT - Andrew Coax Cables
CNT Cables

RG - Other brand Coax Cables
RG Other Cables

Preassembled Coax Cables
Pre Assembled
Rotor Cable
Rotor Cable
 Coaxial Cable Tools
Cable Tools

Grounding Kits

Grounding Kit

Ground Buss Bars

Ground Buss Bar

Cable Entry Boot

Cable Entry Boot

Hanger Kits

Hanger Kit

Hoisting Grip

Hoisting Grip

Mounting Hardware

Mounting Hardware

LMR® is a registered trademark of Times Microwave Systems.

Here is a list of which cables go in which cable groups. PDF

List  Grid 

per page
Set Descending Direction
  1. 243095-9 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    243095-9 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    $32.91

    Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, works for single clamp
    Includes 3/8" bolts and 3-3/4" Rod
    Use either 294561 2" Standoff Adapter or 243684 Angle Clamp and LCLICK series hanger clamps.  See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 243095-9
    NOTE: Use the following hardware
    294561  2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters
    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)
  2. 252028-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    252028-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    $41.91

    Out of stock

    Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps.  See below.
    MFR: Commscope / Andrew
    SKU: 252028-10KT-P
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Clamp for 5/16" Rod 
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
    252029-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

  3. 252027-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    252027-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    $39.91

    Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps.  See below.
    MFR: Commscope
    SKU: 252027-10KT-P 
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Clamp for 5/16" Rod 
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger clamps  (Rod is 6")
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger clamps  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

  4. 294561 CommScope I-Line 2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters 10/Pkg

    294561 CommScope I-Line 2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters 10/Pkg

    $60.91

    I-Line 2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters, 10/Pkg

    Use with Hose Clamp 31670-1 , 31670-2 , or 31670-3 for Round Member Rohn Towers

    Recommended hardware choices to use with 294561

    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)
    43211A Butterfly Hanger for 1/2 in coaxial cableLDF4-50A
    42396A-5  Butterfly Hanger for 7/8 in coaxial cable, AVA5-50

    MFR: CommScope
    SKU: 294561

  5. 31769-1 3/8" x 1" Hardware Kit w/Lockwasher & Nut, 10/Pkg, Andrew

    31769-1 3/8" x 1" Hardware Kit w/Lockwasher & Nut, 10/Pkg, Andrew

    $11.95 As low as: $11.45

    31769-1 3/8" x 1" Hardware Kit w/Lockwasher & Nut, 10/Pkg, Kit for Standard Hangers, includes 3/8 in fillister head bolts and hardware (Nuts &; Lock Washers), 10 pcs/pak

  6. 243950 Andrew 7/16 DIN Female Bulkhead Mounting/Grounding Bracket

    243950 Andrew 7/16 DIN Female Bulkhead Mounting/Grounding Bracket

    $42.95

    243950  Andrew Adapter Kit 7/16 DIN Female Bulkhead Mounting/Grounding Bracket

  7. 42396A-2 Andrew Hanger Kit for 1-5/8" LDF7-50 Heliax Cable

    42396A-2 Andrew Hanger Kit for 1-5/8" LDF7-50 Heliax Cable

    $32.91 As low as: $31.26

    42396A-2  Butterfly Hanger for 1-5/8 in coaxial cable(10pcs per pack), MFR: Andrew / Commscope

     

  8. 243951 CommScope Type-N Female Bulkhead Mounting/Grounding Bracket

    243951 CommScope Type-N Female Bulkhead Mounting/Grounding Bracket

    $18.91

    Out of stock

    • Surge arrestor accessory 
    • Interface: N Female Bulkhead

    MFR: CommScope
    SKU: 243951-COM

    Data Sheet

Items 21 to 28 of 28 total

Page:
  2. 1
  3. 2
  4. 3
Shop By

Currently Shopping by:

  1. Category: Hanger Kits Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Andrew
  2. Andrew / Commscope
  3. Andrew/ Commscope
  4. Commscope
Product Categories
Hours of Operation: Monday - Friday 7:30 - 4:00 PST
  • Minimum Order:  Fifteen ($15.00), all inclusive.
  • Preferred Payments for Domestic and International Purchases:  PayPal, VISA, Master Card, American Express, Direct Deposit and Wire Transfer.
  • All checks will be held for clearance.  This process takes 5 - 7 business days.

RF Parts Company
435 S PACIFIC ST
SAN MARCOS, CA, 92078, USA

1-800-RFPARTS (1-800-737-2787)  1-760-744-0700, #1

Buy with confidence



© 1998-2020 RF Parts Company. All Rights Reserved.