1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Not finding what you are searching for. Try a partial part number.

  • Home /
  • Coaxial Cable & Accessories

Coaxial Cable & Accessories

Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss.  Here is more information on Coaxial Cables. 

Custom Cables and Custom Cable Assemblies

RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.

Coaxial Cables and Accessories

Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )

Heliax Type Cable
Heliax

Waveguide (Elliptical Wavegude)

Waveguide

 Heliax Specials
Heliax Specials

LMR- Times Microwave Coax Cables
LMR Cable
RG - Belden Coax Cables
RG Cable
 CNT - Andrew Coax Cables
CNT Cables

RG - Other brand Coax Cables
RG Other Cables

Preassembled Coax Cables
Pre Assembled
Rotor Cable
Rotor Cable
 Coaxial Cable Tools
Cable Tools

Grounding Kits

Grounding Kit

Ground Buss Bars

Ground Buss Bar

Cable Entry Boot

Cable Entry Boot

Hanger Kits

Hanger Kit

Hoisting Grip

Hoisting Grip

Mounting Hardware

Mounting Hardware

LMR® is a registered trademark of Times Microwave Systems.

Here is a list of which cables go in which cable groups. PDF

List  Grid 

per page
Set Ascending Direction
  1. 294561 CommScope I-Line 2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters 10/Pkg

    294561 CommScope I-Line 2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters 10/Pkg

    $60.90

    I-Line 2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters, 10/Pkg

    Use with Hose Clamp 31670-1 , 31670-2 , or 31670-3 for Round Member Rohn Towers

    Recommended hardware choices to use with 294561

    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)
    43211A Butterfly Hanger for 1/2 in coaxial cableLDF4-50A
    42396A-5  Butterfly Hanger for 7/8 in coaxial cable, AVA5-50

    MFR: CommScope
    SKU: 294561

  2. 31670-1 CommScope® Adapter Kit for 1" to 2" Round Tower Members (10 per package)

    31670-1 CommScope® Adapter Kit for 1" to 2" Round Tower Members (10 per package)

    $19.90 As low as: $18.91

    Use with 294561 Clamp

    • Compatible Diameter, maximum 50.8 mm   |   2 in
    • Compatible Diameter, minimum 25.4 mm   |   1 in
    • Material Thickness 0.711 mm   |   0.028 in
    • Material Type Stainless steel

    MFR: CommScope
    SKU: 31670-1

  3. 243095-5 Commscope Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers 10/Pkg (Hardware Only)

    243095-5 Commscope Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers 10/Pkg (Hardware Only)

    $32.90 As low as: $31.61

    Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers
    Includes 3/8" bolts and 5-1/2" Rod
    Use either 294561 2" Standoff Adapter or 243684 Angle Clamp and LCLICK series hanger clamps.  See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 243095-5
    NOTE: Use the following hardware

    294561  2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters
    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

  4. 252027-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    252027-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)

    $33.90

    Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps.  See below.
    MFR: Commscope
    SKU: 252027-10KT-P 
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Clamp for 5/16" Rod 
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger clamps  (Rod is 6")
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger clamps  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

  5. 243095-1 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    243095-1 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    $36.90

    Includes 3/8" Bolts and 7" Rod, works for up to 3 Hanger Clamps
    Use with 243684 Angle Clamp and LCLICK series hanger clamps. See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 243095-1  
    NOTE: Use the following hardware
    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

  6. 243095-9 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    243095-9 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)

    $32.90 As low as: $31.26

    Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, works for single clamp
    Includes 3/8" bolts and 3-3/4" Rod
    Use either 294561 2" Standoff Adapter or 243684 Angle Clamp and LCLICK series hanger clamps.  See below for matching hardware and hanger clamps.
    MFR: Commscope / Andrew
    SKU: 243095-9
    NOTE: Use the following hardware
    294561  2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters
    243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
    243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)
  7. UGBKIT-0212-T Andrew Tinned Copper Ground Buss Bar - Includes Hardware

    UGBKIT-0212-T Andrew Tinned Copper Ground Buss Bar - Includes Hardware

    $104.91

    General Specifications
    Material Type: Tinned copper
    Hole Distance, center to center: 25.40 mm | 1 in
    Includes: Angle adapters | Grounding bar | Insulators | Mounting brackets | Universal hardware
    Ordering Note: CommScope® non-standard product
    Package Quantity: 1

    MFR: Andrew / Commscope
    SKU: UGBKIT-0212-T

  8. UGBKIT-0412-T Andrew/CommScope Tinned Copper Ground Buss Bar- Includes Hardware

    UGBKIT-0412-T Andrew/CommScope Tinned Copper Ground Buss Bar- Includes Hardware

    $123.90

    General Specifications
    Material Type: Tinned copper
    Hole Distance, center to center: 19.05 mm | 3/4 in
    Includes: Angle adapters | Grounding bar | Insulators | Mounting brackets | Universal hardware
    Ordering Note: CommScope® non-standard product
    Package Quantity: 1

    MFR: Andrew/CommScope
    SKU: UGBKIT-0412-T

  9. UGBKIT-0210 Andrew Ground Buss Bar - Includes Hardware

    UGBKIT-0210 Andrew Ground Buss Bar - Includes Hardware

    $67.91

    General Specifications
    Material Type: Copper
    Hole Distance, center to center: 19.05 mm | 3/4 in
    Includes: Galvanized angle adapter | Grounding bar | Insulators | Mounting brackets | Universal hardware
    Ordering Note: CommScope® non-standard product
    Package Quantity: 1

    MFR: Andrew/Commscope
    SKU: UGBKIT-0210

  10. UGBKIT-0214 Andrew Copper Ground Buss Bar - Includes Hardware

    UGBKIT-0214 Andrew Copper Ground Buss Bar - Includes Hardware

    $104.91

    General Specifications
    Material Type: Copper
    Hole Distance, center to center: 19.05 mm | 3/4 in
    Includes: Angle adapters | Grounding bar | Insulators | Mounting brackets | Universal hardware
    Ordering Note: CommScope® non-standard product
    Package Quantity: 1

    MFR: Andrew
    SKU: UGBKIT-0214

Items 11 to 20 of 515 total

Page:
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
Shop By

Shopping Options

Category
  1. Heliax Type (Andrew-Commscope/ Eupen / RFS-Cablewave)
  2. Waveguide - Elliptical Waveguide
  3. Heliax specials
  4. LMR-Coaxial Cables Times Microwave
  5. RG-Coaxial Cables Belden
  6. CNT-Coaxial Cables Andrew
  7. RG-Coaxial Cables Various Brands
  8. Rotor Cable
  9. Coaxial Cable Tools
  10. Preassembled Coaxial Cables
  11. Cable Entry Boots/Panels
  12. Grounding Kits
  13. Grounding Buss Bars
  14. Hanger Kits
  15. Hoisting Grips
  16. Mounting Hardware
Manufacturer
  1. Active Wire
  2. Alpha
  3. Alpha Wire
  4. Amphenol
  5. Andrew
  6. Andrew / Commscope
  7. Andrew Corp
  8. Andrew / Commscope
  9. Andrew / Commscope
  10. Andrew / Commscope / Commscope
  11. Andrew Corp
  12. Andrew/ Commscope
  13. Andrew/Commscope
  14. Andrews
  15. Belden
  16. Carol Brand - General Cable
  17. Coleman
  18. Commscope
  19. Commscope / Andrew
  20. Consolidated Electronics Wire and Cable
  21. DavisRF
  22. Harbour Industries
  23. Intercomp
  24. Judd Wire
  25. Konectz
  26. M/A-COM
  27. Pasternack
  28. Polyphaser
  29. RADIALL/LARSEN
  30. RF Industries
  31. RF Industries.
  32. RFS / Cablewave
  33. RFS/Cablewave
  34. Ripley (For Times)
  35. Ripley for Times Microwave.
  36. Tensolite
  37. Tensolite or Thermax
  38. Thermax
  39. Thermax or Harbour Industries
  40. Times Microwave
Product Categories
Hours Monday - Friday
7:00 - 3:30 PST

 Celebrating 50 years in business

RF Parts Company

435 S Pacific St
San Marcos, CA, 92078, USA

1-800-RFPARTS (1-800-737-2787)

1-760-744-0700, #1

Minimum Order
  • Fifteen ($15.00), all inclusive.
  • Preferred Payments for Domestic and International Purchases: PayPal, VISA, MasterCard, American Express, Direct Deposit, and Wire Transfer.
  • All checks will be held for clearance. This process takes 5 - 7 business days.

Buy with confidence



© 1998 to RF Parts Company. All Rights Reserved.