Coaxial Cable & Accessories

Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss. Here is more information on Coaxial Cables.

Custom Cables and Custom Cable Assemblies

RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.

Coaxial Cables and Accessories

Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )

Heliax Type Cable	Waveguide (Elliptical Wavegude)	Heliax Specials	LMR- Times Microwave Coax Cables
RG - Belden Coax Cables	CNT - Andrew Coax Cables	RG - Other brand Coax Cables	Preassembled Coax Cables
Rotor Cable	Coaxial Cable Tools	Grounding Kits	Ground Buss Bars
Cable Entry Boot	Hanger Kits	Hoisting Grip	Mounting Hardware

LMR® is a registered trademark of Times Microwave Systems.

Here is a list of which cables go in which cable groups. PDF

F-78 Cable Prep Tool, 7/8" EC5-50, Eupen

$417.91

Out of stock

F-78 Cable Prep Tool, 7/8" EC5-50A Eupen Cable, MFR: Eupen
- | Add to Compare
RFA-4006 RF Industries Deluxe Crimping Kit 2 Handles and 2 Dies

$198.91

Deluxe Crimping Kit Includes:
2 Crimp Tools: RFA-4005-20
RFA-4005-01 Crimp Die Set for RG-58/U, RG-59/U,RG-142/U, RG-8/X, LMR-195, LMR-200, LMR-240 & Proflex Coaxial Cables
RFA-4005-02 Crimp Die Set for RG-8/U, RG-213/U, LMR-400 & Belden

MFR: RF Industries
SKU: RFA-4006
- | Add to Compare
DSXL-D-MA-BFS EMP Surge Filter, 700-2.5 GHz, 7/16 DIN Male/Female Bulkhead, Polyphaser

$59.95 As low as: $56.50

DSXL-D-MA-BFS EMP Surge Filter, 700-2.5 GHz, 7/16 DIN Male/Female Bulkhead w/Mounting Flange, MFR: Polyphaser
- | Add to Compare
097-0311G-A.2 Polyphaser Impulse Suppressor 800MHz to 1GHz (NOS)

$49.91
The 097-0311G-A.2 is used as a transmit and/or receive unit with dc voltages up to 24Vdc to power up a Receive Only (R.O.) Preamp generally located near the top of the tower at the antenna. Maximum RF power use is 300 watts.

Includes Hardware

Connectors: Type-N Male/Female
New Old Stock * No longer available for export
MFR: Polyphaser
SKU: 097-0311G-A.2
- | Add to Compare
IS-B50LN-C2-MA Polyphaser High Power DC Blocked Protector 125-1000 MHz

$108.91 As low as: $105.50

Mount Type: Bulkhead
Surge Side Connector: N Male
Protected Side Connector: N Female

MFR: Polyphaser
SKU: IS-B50LN-C2-MA
- | Add to Compare
243951 CommScope Type-N Female Bulkhead Mounting/Grounding Bracket

$18.91

Out of stock
- Surge arrestor accessory
- Interface: N Female Bulkhead
MFR: CommScope
SKU: 243951-COM

Data Sheet
- | Add to Compare
CT-600 Times Microwave Crimp Tool for LMR600 Crimp Connectors

$154.95

Out of stock

Crimp Tool for LMR600 Crimp Connectors
MFR: Times Microwave
SKU: CT-600
- | Add to Compare
RFA-4005-10 RF Industries Die Set for RFA4005-20 Crimp Handle

$32.91 As low as: $31.26

For RG-8, RG-11 and RG-213 coaxial cable.
Hex Cavity Dimensions: .080, .10, .429
Use with Handle RFA4005-20
MFR: RF Industries
SKU: RFA-4005-10
- | Add to Compare
47-20002 Amphenol Crimp Die Set for 47-10000 Crimp Tool Handle

$38.91
- Will work on the following cable types: RG174, RG188, RG316, LMR100A, RG58, LMR195. Cable Groups B & C Connectors.
- Will also work on RF Industries Handle RFA4005-20 and some Paladin models.
- Hex Cavity Dimensions are .042, .068, .178, .213.
MFR: Amphenol
SKU: 47-20002
- | Add to Compare
RFA-4005-04 RF Industries Die Set for RFA-4005-20 Crimp Handle

$27.91 As low as: $26.51

The RFA-4005-04 Precision Die Set is used to crimp RG-59-62/U, CP-88, CP-89 cables.
Hex Cavity Dimensions: .239, .068, .319 inch
MFR: RF Industries
SKU: RFA-4005-04
- | Add to Compare