Radio & Amplifier Service Parts

LEMO connectors are exceptionally reliable and robust owing to the "Push-Pull" self-latching system. LEMO is known for their quality and reliability and LEMO connectors can be found in many challenging and life saving applications including: medical, broadcast, test & measurement, aerospace, automotive and industrial.

• RoHs Compliant

MFR: LEMO
Made In Switzerland
SKU: FGG.1B

Data Sheet

• 2 Brackets and 4 Screws
• Nickel Plated
• 4522-009

MFR: Bird Electronics
SKU: 4522-BKT

Use this clamp to attach to a tower or plate for hanging cable or wire. See below for matching hardware and hanger clamps. 10 pieces per pack
MFR: Commscope / Andrew
SKU: 243684
Note: Use the following hardware
243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

TIE15-100 3M™ 15" Black Nylon Cable Ties - 100/pkg 120lb Tensile Strength

MFR: 3M™ Company
SKU: INFTIE-15-100  

See Data Sheet Tab Below

• Brackets pulled from Henry Radio Generators
• Can be used for Line Sections other than Bird

Used
MFR: Henry Radio Company
SKU: LS-BKT-P

Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps.  See below.
MFR: Commscope / Andrew
SKU: 252028-10KT-P
NOTE:  Use the following hardware:
252026-10KT-P  Angle Clamp for 5/16" Rod 
252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
252029-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 10-5/16")
68MCLICK  Hanger Clamp for 6-8mm Cable or wire
912MCLICK  Hanger Clamp for 9-12mm Cable or wire
1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps.  See below.
MFR: Commscope
SKU: 252027-10KT-P 
NOTE:  Use the following hardware:
252026-10KT-P  Angle Clamp for 5/16" Rod 
252028-10KT-P  5/16" Rod & hardware for stacking two hanger clamps  (Rod is 6")
252029-10KT-P  5/16" Rod & hardware for stacking three hanger clamps  (Rod is 10-5/16")
68MCLICK  Hanger Clamp for 6-8mm Cable or wire
912MCLICK  Hanger Clamp for 9-12mm Cable or wire
1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

294561  2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters
243684  Angle Clamp Adapter, compact with 3/8 inch tapped hole
243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

I-Line 2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters, 10/Pkg

Use with Hose Clamp 31670-1 , 31670-2 , or 31670-3 for Round Member Rohn Towers

Recommended hardware choices to use with 294561

MFR: CommScope
SKU: 294561