Tools
Please choose from the following TOOL Sub-Catagory choices:
NOTE: ALL TOOLS / HARDWARE ARE NON-RETURNABLE. IF YOU HAVE QUESTIONS ON PURCHASING THE CORRECT ITEM. PLEASE CONTACT CUSTOMER SERVICE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-
TK-400/400-75EZ-HC Times Microwave Installation Tool Kit for LMR400 and LMR400-75
$749.91 -
152768 Thorsen Professional 3 Piece Extractor Set, Sizes: 1,2,3 Made in USA
$10.95 -
CST-500 Cablematic Coring Stripping Tool for Cable Type 500
$91.91Can to be used on CommScope P1, P3 Cable Guard Cable; Times Fiber T4, T6, T10 Cable; Alcatel Cable Benelux - ACE Cable
- Manual or drill operation
- Combination stripping and coring tool
- Heat treated sheath cutting blade
- Spiral-fluted, heat treated steel coring bit
- Rugged, durable all metal construction
MFR: Ripley Company
SKU: CST-500 -
GST-400A Times Microwave Mid-Span Stripping Tool
$602.91Times Microwave's GST-400 bundled LMR coaxial cable mid-span stripping tool will quickly remove the outer jacket of LMR 400-based bundled cables when installing grounding strips. This 50 Ohm cable wire mid-span stripping tool is aluminum to give a perfect end or mid-span cable jacket removal.
MFR: Times Microwave
SKU: GST-400A -
RFA-4018-20 RF Industries Unidapt Cable Tester
$165.91 -
RFA-4018 RF Industries 31 Piece Unidapt Cable Testing Kit in Hard Case
$340.91 -
RFA-4018-20 RF Industries Unidapt Cable Tester (DEMO)
$114.91Features:
• Powered by a 9-volt battery.
• Lightweight, small & completely portable.
• LED panel on front of tester indicates Pass or Fail.
• If Fail, panel saves valuable diagnostic time by indicating whether due to Short, Open Conductor or Open Shield.Used for Demonstration
MRF: RF Industries
SKU: RFA-4018-20-D -
RFA-4022 RF Industries Unidapt Mega Plus Kit 74 Pieces with Unicables in Plastic Case
$807.91 As low as: $712.41Out of stock
The RFA-4022, 74-piece Unidapt™ Mega-Plus Kit, contains all adapters found in our classic RFA-4024 Unidapt™ Kit, plus 34 additional parts: two 48” Unicables™, Unidapt™ female-to-female barrel adapter, the Unidapt™ Cable Tester, three more universal adapters and an assortment of reverse polarity adapters.
MFR: RF Industries
SKU: RFA-4022 -
-
RFA-4005-20 RF Industries Crimping Tool Handle
$61.91 As low as: $58.86The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors ratchet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism.
MFR: RF Industries
SKU: RFA-4005-20See Die Sets
