Tools
Please choose from the following TOOL Sub-Catagory choices:
NOTE: ALL TOOLS / HARDWARE ARE NON-RETURNABLE. IF YOU HAVE QUESTIONS ON PURCHASING THE CORRECT ITEM. PLEASE CONTACT CUSTOMER SERVICE.
-
RFA-4006-500 RF Industries Master Crimp Kit with 2 Handles and 22 Dies
$562.91The RFA-4006-500 kit contains two RFA-4005-20 crimp handles and seventeen interchangeable die sets in one convenient, foam-lined plastic case. With on kit you can crimp terminials and coaxial cable from RG174/U to LMR400. This is the most complete kit offered, and is sure to be a popular one for installers, field techincians and production floor use.
Includes:
- 2 RFA-4005-20 Handles
- 7 Dies for crimping insulated and non-insulated terminals
- 10 Dies for crimping coaxial cable ranging from RG-174/u to LMR-400 sizes
- In foam lined plastic case.
MFR: RF Industries
SKU: RFA4006-500 -
RFA-4009 RF Industries Heavy Duty Crimp Handle and Die Kit
$469.91 -
RFA-4018 RF Industries 31 Piece Unidapt Cable Testing Kit in Hard Case
$336.91 -
RFA-4005-501 RF Industries Crimping Tool Kit with 6 Dies and Hard Case
$229.91 -
RFA-4005 RF Industries Crimping Tool Kit in Hard Case
$159.91 -
RFA-4005-314 RF Industries Crimp Handle/Die Combo Set for LMR400 Cable
$74.91Specific For LMR400/9913 coax cable. Combo of part number RFA-4005-20 and RFA-4005-14.
You can use other dies on the handle, but this combo is specific for the Popular LMR400/9913/CNT400 Coax Cables. It will crimp the Ferrule on RG213, RG8, RG214 Coax Cables, but not the center pin. (Ferrule Only).
MFR: RF Industries
SKU: RFA-4005-314 -
RFA-4005-20 RF Industries Crimping Tool Handle
$49.91 As low as: $47.41The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors ratchet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism.
MFR: RF Industries
SKU: RFA-4005-20See Die Sets
-
RFA-4087 RF Industries Stripping Tool for RFI / Amphenol Connectors
$49.91 As low as: $47.41Contains 3 adjustable blades.
- Die-cast zinc body
- Adjustable SK-5 blade (Replacement blade kit RFA4087-R14)
- Two or three-step stripping
- 9.25mm to 10.8mm (.364 to .425 inches)
- For RG-8, 11, 213, 214, 9913, 9914, LMR400, LMR400UF
- Perfect for larger coax stripping needs
MFR: RF Industries
SKU: RFA-4087 -
RFA-4005-01 RF Industries Die Set for RFA-4005-20 Crimp Handle
$32.91 As low as: $31.26The RFA-4005-01 Precision Die Set. Hex Cavity dimensions are: .052, .068, .100, .213, .255
Will work on the following cables: RG-58/U, RG-59/U, RG-142/U, RG-223/U, RG-400/U, RG-8X, LMR195, LMR240, Proflex and various video cables.
MFR: RF Industries
SKU: RFA-4005-01NOTE: Will also work on PALADIN 1300 SERIES.
-
RFA-4005-02 RF Industries Die Set for RFA-4005-20 Crimp Handle
$32.91 As low as: $31.26The RFA-4005-02 Precision Die Set is used to crimp RG-8/U, RG-213/U, RG-214/U, and Belden 9913 cables.
Hex Cavity Dimensions: .100, .128, .429 inch
Die set for Cable Group E, F, I cables: RG8, 213, 214, 9913, & LMR400 type cables.
NOTE: Will also work on PALADIN 1300 SERIES.
MFR: RF Industries
SKU:RFA-4005-02