Tools
Please choose from the following TOOL Sub-Catagory choices:
NOTE: ALL TOOLS / HARDWARE ARE NON-RETURNABLE. IF YOU HAVE QUESTIONS ON PURCHASING THE CORRECT ITEM. PLEASE CONTACT CUSTOMER SERVICE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-
RFA-4005-02 RF Industries Die Set for RFA-4005-20 Crimp Handle
$34.91 As low as: $33.29The RFA-4005-02 Precision Die Set is used to crimp RG-8/U, RG-213/U, RG-214/U, and Belden 9913 cables.
Hex Cavity Dimensions: .100, .128, .429 inch
Die set for Cable Group E, F, I cables: RG8, 213, 214, 9913, & LMR400 type cables.
NOTE: Will also work on PALADIN 1300 SERIES.
MFR: RF Industries
SKU:RFA-4005-02 -
RFA-4005-05 RF Industries Die Set for Fiber Optic Connectors
$26.91 As low as: $25.56 -
RFA-4005-14 RF Industries Die set for RFA4005 Crimp Handle
$34.91 As low as: $33.29 -
RFA-4005-10 RF Industries Die Set for RFA4005-20 Crimp Handle
$34.91 As low as: $33.29 -
RFA-4005-01 RF Industries Die Set for RFA-4005-20 Crimp Handle
$34.91 As low as: $33.29The RFA-4005-01 Precision Die Set. Hex Cavity dimensions are: .052, .068, .100, .213, .255
Will work on the following cables: RG-58/U, RG-59/U, RG-142/U, RG-223/U, RG-400/U, RG-8X, LMR195, LMR240, Proflex and various video cables.
MFR: RF Industries
SKU: RFA-4005-01NOTE: Will also work on PALADIN 1300 SERIES.
-
RFA-4005-20 RF Industries Crimping Tool Handle
$61.91 As low as: $58.86The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors ratchet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism.
MFR: RF Industries
SKU: RFA-4005-20See Die Sets
-
RFA-4018 RF Industries 31 Piece Unidapt Cable Testing Kit in Hard Case
$340.91
Items 11 to 17 of 17 total
-
- 1
- 2
