1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Tools

Please choose from the following TOOL Sub-Catagory choices:

NOTE: ALL TOOLS / HARDWARE ARE NON-RETURNABLE. IF YOU HAVE QUESTIONS ON PURCHASING THE CORRECT ITEM.  PLEASE CONTACT CUSTOMER SERVICE.

CABLE TESTER

CABLE TESTER

CRIMP HANDLES

CRIMP HANDLES

CRIMP DIES

CRIMP DIES

CRIMPER KITS/HANDLE DIE SETS

CRIMPER KITS

DEBURRING TOOLS

DEBURRING TOOL

FLARING TOOLS

FLARING TOOLS

KNIBBLING TOOL

KNIBBLING TOOL

SOLDER SUCKER

SOLDER SUCKER

STRIPPING TOOLS-MANUAL

STRIPPING TOOL - MANUAL

STRIPPING TOOLS-AUTOMATED

STRIPPING TOOL - AUTOMATED

REPLACEMENT BLADES

REPLACEMENT BLADES

TORQUE WRENCH

TORQUE WRENCH

TUNING TOOLS

TUNING TOOLS

POWERPOLE TOOLS

POWERPOLE TOOLS

WIRE CUTTERS

WIRE CUTTERS

 

 

List  Grid 

per page
Set Descending Direction
  1. RFA4018  Unidapt Cable Testing Kit - RFA4018-20 & RFA4024 in Hard Case, RFI

    RFA4018 Unidapt Cable Testing Kit - RFA4018-20 & RFA4024 in Hard Case, RFI

    $309.95

    RFA4018  UNIDAPT CABLE TESTER KIT, Cable Tester and Connectors in Hard Case, MFR: RF Industries

  2. RFA-4005-20 RF Industries Crimping Tool Handle

    RFA-4005-20 RF Industries Crimping Tool Handle

    The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors ratchet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism.

    MFR: RF Industries
    SKU: RFA4005-20

    See Die Sets

  3. RFA-4005-10 Die Set for RFA4005-20 Crimp Handle, RFI

    RFA-4005-10 Die Set for RFA4005-20 Crimp Handle, RFI

    RFA-4005-10 Die Set for RFA4005-20 Handle, Cable Group E, RG8, RG11, RG213, RG393, MFR: RF Industries

    The RFA-4005-10 Precision Die Set is used to crimp RG-8, RG-11 and RG-213 coaxial cable. Hex Cavity Dimensions: .080, .10, .429, 

  4. RFA-4005-24 RF Industries Die Set for RFA4005-20 Crimp Handle

    RFA-4005-24 RF Industries Die Set for RFA4005-20 Crimp Handle

    $23.95

    Commercial Grade Modular Die
    Insulated Terminals from 0.5 to 6 sq. mm.
    AWG 22-18, 16-14, 12-10
    MFR: RF Industries

    SKU: RFA4005-24

  5. RFA-4005-14 RF Industries Die set for RFA4005 Crimp Handle

    RFA-4005-14 RF Industries Die set for RFA4005 Crimp Handle

    This die se is for LMR400 cable.  The die sizes are for both the center pin and ferrule.
    MFR: RF Industries

    SKU: RFA4005-14

     

  6. RFA-4005-05 Die set for fiber optic conn, Fits RFA-4005-20 handle

    RFA-4005-05 Die set for fiber optic conn, Fits RFA-4005-20 handle

    $24.50

    RFA-4005-05 Die Set for RFA-4005-20, for Fiber Optic Connectors

  7. RFA-4005-01 RF Industries Die Set for RFA-4005-20 Crimp Handle

    RFA-4005-01 RF Industries Die Set for RFA-4005-20 Crimp Handle

    The RFA-4005-01 Precision Die Set. Hex Cavity dimensions are: .052, .068, .100, .213, .255
    Will work on the following cables: RG-58/U, RG-59/U, RG-142/U, RG-223/U, RG-400/U, RG-8X, LMR195, LMR240, Proflex and various video cables.
    MFR: RF Industries

    SKU: RFA4005-01
    NOTE: Will also work on PALADIN 1300 SERIES.

  8. RFA-4005-02 RF Industries Die Set for RFA-4005-20 Crimp Handle

    RFA-4005-02 RF Industries Die Set for RFA-4005-20 Crimp Handle

    The RFA-4005-02 Precision Die Set is used to crimp RG-8/U, RG-213/U, RG-214/U, and Belden 9913 cables.
    Hex Cavity Dimensions: .100, .128, .429 inch
    Die set for Cable Group E, F,  I cables: RG8, 213, 214, 9913, & LMR400 type cables. 
    NOTE: Will also work on PALADIN 1300 SERIES.
    MFR: RF Industries

    SKU:RFA4005-02

  9. RFA-4005-04  Die Set for RFA-4005-20 Crimp Handle, 0.068, 0.239, 0.319, RFI

    RFA-4005-04 Die Set for RFA-4005-20 Crimp Handle, 0.068, 0.239, 0.319, RFI

    RFA-4005-04  Die Set for RFA-4005-20 Handle, 0.068, 0.239, 0.319, MFR: RF Industries

    The RFA-4005-04 Precision Die Set is used to crimp RG-59,-62/U, CP-88, CP-89 cables. Hex Cavity Dimensions: .239, .068, .319 inch

  10. RFA-4005-08  RF Industries Die Set for RFA-4005-20 Crimp Handle

    RFA-4005-08 RF Industries Die Set for RFA-4005-20 Crimp Handle

    The RFA-4005-08 Precision Die Set. Hex Cavity Dimensions: .324, .255, .068, .042
    For Cable Group D & G: RG59/U & 8281
    MFR: RF Industries

    SKU: RFA4005-08

     

Items 1 to 10 of 18 total

Page:
  1. 1
  2. 2