Switches

The 2AC60 is a Sensitive Switch that was used by the U.S. Military.

• Body Height: 1.300 Inches Nominal
• Body Length: 1.660 Inches Maximum
• Body Width: 0.490 Inches Minimum And 0.550 Inches Maximum
• Contact Load Current Rating At Maximum Rated Voltage: 5.000 Amperes Resistive Dc And 3.000 Amperes Inductive Dc And 5.000 Amperes Resistive Ac And 5.000 Amperes Inductive Ac
• Maximum Voltage Rating In Volts: 250.0 Ac And 28.0 Dc

New Old stock * New in Box * no longer available for export
MFR: Micro Switch for Honeywell
SKU: 2AC60

Data Sheet

Removed from working equipment

• Current Rating: 15 A
• Voltage Rating AC: 125 VAC
• Voltage Rating DC: 125 VDC
• Operating Force: 1814 gf

Used * No longer available for export
MFR: Micro Switch for Honeywell
SKU: 13AC1-P

• Lighted Button
• Momentary action
• .015 to 1 amp
• 30 vdc or 125vac (max)

Used * Pulled from Henry 3000D Generator * No Longfer available for export
MFR: Dailight
SKU: 554-1221-211-P

Data Sheet

• Lighted Button
• Momentary action
• .015 to 1 amp
• 30 vdc or 125vac (max)

Used * Pulled from Henry 3000D Generator * No Longfer available for export
MFR: Dailight
SKU: 554-1221-211-STANDBY-P

Data Sheet

• Shaft: 1/4" x 9/16"
• Mounting Plate / Board / Switch Assembly: 4-1/4" wide x 3-1/2" high x 2-1/4" deep

Used * No longer available for export
MFR: Yokogawa Medical Systems
SKU: PC1020-BS-P

• Non-Shorting
• Material: Phenolic
• 60° Angle index
• For use with PA-1000 Series Switch

New Old Stock * No longer available for export
MFR: Centralab
SKU: PA-45

• Shaft: 1/4" Diameter x 1-3/4" long
• Body: 4-9/16" long x 2-9/16" x 3-13/32"
• Includes Knob
• Non-Shorting

New Old Stock * No longer available for export
MFR: Unbranded
SKU: 2-6-4D-RS

• To be used with the SP212 , SPU304 or RPU408 shaft

New Old Stock * No longer available for export
MFR: Centralab
SKU: KR-8-CRL

Ideal for operating switches, potentiometers, etc., that must be located, for short leads, in a remote part of the chassis.

• Compact: the case size is 1-1/2" x 1-1/2" x 3/4"
• Uses bevel gears
• Mounts on standoff rods, single hole panel bushing or tapped holes in frame
  

Used * No longer availabel for export
MFR: Millen Manufacturing Company, Inc.
SKU: 10012-P