(800) 737-2787
rfp@rfparts.com
435 S. Pacific St.
San Marcos, CA 92078

High Voltage Assemblies/Doorbell

High Voltage Doorbell Rectifiers
Standard Recovery, Stackable

Part NumberMax. PIVRated CurrentSurge CurrentSize
Dia x W (in.)
Mfg.
UDB5 5KV 2A 100A 1.9 x 0.79 NATIONAL
UDE5 5KV 4.5A 200A 1.9 x 0.79 UNITRODE
S6HVM5 5KV 4A 100A 1.9 x 0.82 SEMTECH

 

Open Stack High Voltage Rectifiers
Part Number 51000 Convection Cooled, Open Construction High Voltage Rectifier. Individual board used in the 51050. It may be used in two's for lower power transmitters. Use as 24 KV PIV single string or as a doubler where 12 KV PIV per section is suitable. Conservatively rated at 5.5 Ampere. Direct replacement for CCA transmitters.



Part Number 55014 Convection Cooled, Open Construction High Voltage Rectifier. One of various configurations available. Used in many of the leading FM broadcast transmitters sold today. Conservatively rated at 5.5 Amperes, 40 KV (20 KV per section) PIV rating makes for a very high reliability component. Each rectifier element in the stack is bridged with a Heavy Duty MOV for the maximum in transient voltage protection. Requires minimum 100 CFM air flow. 100% interchangeable with rectifiers CK299, CKE047 and part #353-6596-030 in Continental's 5 KW through 30 KW transmitters (3 units required for the 3-phase full wave bridge).





New Part NumberOld Part NumberMax. PIVRated CurrentSurge CurrentSize InchesStyle
51000 51048 24 KV # 5.5 A 400 A 9.1 x 1.9 x 1.5 Board only, Single String
51014 51050 20 KV # 5.5 A 400 A 9.0 x 9.0 x 2.5 1 Ph FW Bridge
55014 55050 (1) 20 KV # 5.5 A 400 A 10.8 x 3.8 x 3.8 Doubler

List  Grid 

per page
Set Ascending Direction

4 Item(s)