Attenuators
Please choose from the following ATTENUATOR Sub-Catagory choices:
NOTE: Attenuation expressed in decibels of relative power.
A 3 dB pad reduces power to one half, 6 dB to one fourth, 10 dB to one tenth, 20 dB to one hundredth, 30 dB to one thousandth and so on. For voltage you double the dBs so for example 6 dB is half in voltage.
EXAMPLE: Calculating 50 Watt Attenuator into dB:
3db: 50 x 0.50 = 25 watt; 6db: 50 x 0.25 = 12.5 watt; 10db: 50 x 0.10 = 5 watt; 20db: 50 x 0.01 = 0.5 watt; 30db: 50 x 0.001 = 0.05 watt; 40db: 50 x 0.0001 = 0.005 watt.
FY-A03 Microlab Low PIM Attenuator 30dB 2496-2690 MHz (NOS/NIB)
In Stock
- Connectors: 4.1-9.5 Male / Female
- Attenuation: 30dB
- Watts: 20
- Frequency: 2496 - 2690 MHz
New OLd Stock * New In Box * No longer available for export
MFR: Microlab
SKU: FY-A03
50043-1180 Type-N 3dB Fixed Tee Attenuator (2CP2TEE) (NOS)
In Stock
- 50043-1180P/OT-745AN/APA-128
New Old Stock * No longer available for export
MFR: Unbranded
SKU: 50043-1180
50P-046 JFW Programable Attenuator 70dB (NOS)
In Stock
A programmable attenuator is a variable attenuator with a specific dB step size and total attenuation. 50 Ohm impedance with electro-mechanical relay design.
- Max Attenuation: 70dB
- dB Step: 10 / 20
New Old Stock * No longer available for export
MFR: JFW Industries, Inc.
SKU: 50P-046
50F-03.4 JFW Type-N Male/Female 3.4dB Attenuator (Pull)
In Stock
- Rating: 3.4dB
- 2 Watt
Used * No longer available for export
MFR: JFW Industries, Inc.
SKU: 50F-03.4-P
50F-000 JFW Type-N Male/Female 0dB Attenuator (Pull)
In Stock
- Rating: 0dB
- 2 Watt
Used * No longer available for export
MFR: JFW Industries, Inc.
SKU: 50F-000-P
3201-4 Weinschel Programmable Attenuator 12V DC (Pull)
In Stock
Weinschel's programmable attenuators are used to control the power of radio frequency and microwave signals.
- 0 to 1.2 dB
- dB Steps: .1 / .2 / .3 / .6
Used * No longer available for export
MFR: Weinschel Corporation
SKU: 32014-P
41-6-12 Weinschel Attenuator 10 Watt 6dB (Pull)
In Stock
- Connector: SMA Male/Female
- Freq: DC-18 GHz
Used * No longer available for export
MFR: Weinschel Corporation
SKU: 41-6-12-P
MDC2017S-40 Midisco DC-3GHz 0-10 Db Step-up Attenuator (Pull)
In Stock
MDC2017S-40 Midisco DC-3GHz 0-10 dB Step-up Attenuator. 1dB Step Step-up attenuator. SMA Female Connectors
Used Good condition * No longer available for export
MFR: Midisco
SKU: MDC2017S-40
3200-1 Weinschel Programmable Attenuator 12V DC to 2GHz (Pull)
In Stock
Weinschel's programmable attenuators are used to control the power of radio frequency and microwave signals.
- 0 to 127 dB
- dB Step Size: 1 dB
Used * No longer available for export
MFR: Weinschel Corporation
SKU: 32001-P
355C Hewlett Packard VHF Variable Attenuator 1000MHz 12dB (Pull)
In Stock
Used to measure gain, attenuation, frequency response, and to calibrate signal sources.
- Attenuation: 12 dB in 1-dB steps.
- Frequency Range: DC to 1000 MHz.
Used * No longer available for export
MFR: Hewlett Packard
SKU: 355C-P
Add to Cart
