Chokes & Inductors
Please choose from the following CHOKE / INDUCTOR Sub-Catagory choices:
Ceramic Pilar Choke / Inductor 117μh (Pull)
In Stock
- 4 Inches long
- 3/4 Inch Diameter
- 24 AWG Wire
Used
SKU: CPC-117-P
Ceramic Pilar Choke / Inductor 20μh (Pull)
In Stock
- 5 Inches long
- 1 Inch Diameter
- 15 AWG Wire
Used
SKU: CPC-20-P
Replacement Pillar Choke with Anode Clips for Palomar 90A 20uH (Pull)
In Stock
- Pillar size: 2-1/2" x 1/2" Diameter
- Includes 2kv .002 Capacitor
Used * No longer available for export
SKU: 20uH-CHOKE-PAL90A-P
RF Choke 5 Pi 2.5mH (NOS)
In Stock
- Size: 1-7/16" x 1/2" diameter
New Old Stock * No longer available for export
MFR: Unlabeled
SKU: 2.5-5pi-CHOKE
SWF-4 Hammarlund Coil Form (NOS/NIB)
In Stock
This coil form is made of XP-53, the Hammarlund dielectric specified by leading designers of short wave radios. The molded shelf
inside this coil form provides for mounting a Hammarlund IBT or APC trimming or padding condenser for tuning the coil to a fixed frequency,
or for band spread
- Ribbed for air spacing.
- Proportioned for highest "Q"
- Designed for maximum efficiency
New Old Stock * New In Box * No longer available for export
MFR: Hammarlund Manufacturing Company Inc.
SKU: SWF-4
Z-21 Ohmite Power Line Choke 10 Amps (NOS/NIB)
In Stock
Designed primarily for amateur use of low power transmitters. Prevents interference from high frequency currents.
New Old Stock * New In Box * No longer available for export
MFR: Ohmite Manufacturing Company
SKU: Z-21-OHMITE
43A823CBI Miller Adjustable Coil 5.10-10.0μh (NOS/NIB)
In Stock
New Old stock * New In Box * No longer available for export
MFR: J.W. Miller
SKU: 43A823CBI
RFC-50 Vintage Miller R.F. Choke 8.2μh 30-90 MHz (NOS/NIB)
In Stock
New Old Stock * New In Box * No longer available for export
MFR: J.W. Miller Division of Bell Industries
SKU: RFC-50
26487 Barker & Williamson Vintage Edgewound Silver Plated Roller Inductor 14.9μH (Pull)
In Stock
- Capacitance: 14.9μH
- Length: 9-13/16 in
- Height: 6-1/2 in
- Width: 6-9/16 in
- Coil Thickness: 0.125 inch
- 3 Turns per inch
Used * No longer available for export
MFR: Barker & Williamson
SKU: 26487-P
937-9325-002 Gates Edgewound Variable Pitch Silver Plated Roller Inductor 16.5μH (Pull)
In Stock
- Capacitance: 16.5μH
- Length: 11-5/8 in
- Height: 6-3/8 in
- Width: 6 in
Used * No longer available for export
MFR: Gates Radio Company for Harris - Intertype Corporation
SKU: 937-9325-002-P
