Radio & Amplifier Service Parts
Please choose from the following RADIO & AMPLIFIER SERVICE PARTS Sub-Category choices:
Henry 3000D Radio Frequency Power Generators from Henry Electronics
In Stock
HENRY 3000D Radio Frequency Power Generators Rated at 3000 Watts Continuous Output on 13.56 MHz
We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years. They were removed from service at "Applied Materials". The Henrys as a whole and the parts therein, are in good condition.
- Eimac 3CX3000A7 tube.
- Full Bird Dual Slug Wattmeter setup with forward and reflected power.
- Three Phase 208/240 V input.
- Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
- Power requirement: 40 Amps
Please send an email to customerservice@rfparts for any questions that you may have.
Weight 600 lbs. (Local Pickup or Truck Freight)
FOB San Marcos, CA
MFR: Henry Radio Electronics, California
Not available for export Limited Warranty
Add to Cart
ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier
In Stock
ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier
This transformer was removed from a working Henry 3000D Amplifier from the Henry Radio Industrial Division.
Size: 4-3/8" Long x 5 1/4" High x 4" wide, Weight: 13.85 lbs
Excellent condtion * No longer available for export
SKU: ECA1102
ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va Removed from Henry 3000D
In Stock
Regular Price: $194.90
Special Price $179.95
ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va MFR: ECA - Anaheim
This transformer was removed from a working Henry 3000D RF Power Generator amplifier. In excellent condtion - Like New.
Size: 4-3/8" Long x 5-3/8" High x 5" wide, Weight: 17.45 lbs
Made in USA, Limited Quantity Available, Not Available for Export
Add to Cart
554-1221-211 Dailight DPDT Push Button "Power" Switch 5/8" SQ. (Pull)
In Stock
- Lighted Button
- Momentary action
- .015 to 1 amp
- 30 vdc or 125vac (max)
Used * Pulled from Henry 3000D Generator * No Longfer available for export
MFR: Dailight
SKU: 554-1221-211-P
Add to Cart
3540S-1-102 Bourns Precision Potentiometer 1K ohm 5% (Pull)
In Stock
- Resistance: 1 kOhms
- Element Type: Wirewound
- Shaft Type: Slotted
- Tolerance: 5 %
Used * Pulled from Henry 3000D Generator * No longer available for export
MFR: Bourns
Made in Mexico
SKU: 3540S-1-102-P
Add to Cart
Henry Electronics Driver Amplifier & Power Supply for 3000D Generator 9600-0200 (Pull)
In Stock
- Uses two MRF422 150 Watt Transistors, 28 volt
Clean Pull * No longer available for export
MFR: Henry Electronics
SKU: 9600-0200-P
Add to Cart
CL2L2 Comair Rotron Caravel Axial Fan 1650 RPM 560CFM 1.0-0.88 Amps 36 Watts 115 VAC 60/50 Hz (Pull)
In Stock
Axial Fan removed from Henry Electronics 3000D RF Power Generator Amplifier. This Fan is in Like New condition. Screen included.
- Size: 10" (254mm) Diameter x 3-1/4" (44.45mm) Deep
Used * No longer available for export
MRF: Comair Rotron
Assembled in Mexico
SKU: CL2L2
ECA5027 HV Swinging Choke Transformer, 15-8 Henry, 1.5A Removed from Henry 3000D
In Stock
ECA5027 Swinging Choke Transformer, 15-8 Henry, 1.5A Continuous (Removed from Henry 3000D), MFR: ECA
This High Voltage Choke Transformer was removed from a working Henry 3000D RF Power Generator Amplifier.
It is in like-new, excellent condtion
Size: 5.5" Long x 6-1/2" High x 8" wide, Weight: 46 lbs
Limited Quantity Available No longer available for Export
Add to Cart
HENRY-CIRCUITPANEL 3000D Henry Electronics Circuit Breaker Panel
In Stock
HENRY-CIRCUITPANEL 3000D Henry Electronics Circuit Breaker Panel from a 3000D RF Power Generator.
Add to Cart
HENRY-METERPANEL 3000D Henry Electronics Meter Panel
In Stock
HENRY-METERPANEL 3000D Henry Electronics Meter Panel from a 3000D Power Generator.
Add to Cart
