Radio & Amplifier Service Parts
Please choose from the following RADIO & AMPLIFIER SERVICE PARTS Sub-Category choices:
11 Pin Male Accessory Plug (NOS)
In Stock
Commonly used in Older Ham Radios, Heathkit, National, Kenwood, Yaesu, Ameritron, etc. Relay connector for Kenwood TL922, Yaesu FL2100Z and Heathkit SB-101, HW-101 and Collins S-Line.
MFR: Cinch, Amphenol
SKU: 11PINACCPLUG
431-13 HH Smith Original Heathkit 4 Screw Terminal Strip For SB200 SB220 and SB221 (NOS)
In Stock
OEM product for Heathkit Amplifiers
New Old Stock * No longer available for export
MFR: HH Smith Made in USA
SKU: 431-13
CM15-200 Sangamo Molded Mica Capacitor 200pf 500 volts 5% Axial Lead (NOS)
In Stock
CM15-200 Sangamo Molded Mica Capacitor 200pf 500 volts 5% Axial Lead (NOS)
New Old Stock * No longer available for export
MFR #: CM15ED201J
MFR: Sangamo
Similar to Heathkit Part number: 20-3
Add to Cart
TSA90-3WL-1 Raytheon Black Tuning Knob with Skirt and Chrome Cap with White Pointer (NOS)
In Stock
- Gloss finish
- Shaft: 1/8"
- Size: 0.945" x 0.6"
New Old Stock * No longer available for export
MFR: Raytheon
SKU: KNOB2A
Add to Cart
16-010-010A Vintage Open Frame Relay 3PDT 110vdc 5a (NOS)
In Stock
- Possible replacement for the SB220 and SB221 amplifiers.
- Similar to the KA14DY
New Old Stock
MFR: Unbranded
SKU: 16-010-010A
1414-10 Terminal Lug #10 Screw, Solder Type
In Stock
1414-10 Terminal Lug #10 Screw, Solder Type Pack of 2
SKU: 1414-10
Add to Cart
SF6B Cabinet Feet w/Steel Support, Black (Pack of 12) Budwig
In Stock
SF6B Cabinet Feet w/Steel Support, Black (Pack of 12), MFR: Budwig Manufacturing Company
Cabinet feet for Collins, Heathkit, etc. Thermoplastic Rubber feet with steel support bushing. Use #6 sheet metal or machine screw - 3/8" long
Add to Cart
SF6B Cabinet Feet w/Steel Support, Black (Pack of 4) Budwig
In Stock
SF6B Cabinet Feet w/Steel Support, Black (Pack of 4), MFR: Budwig
Cabinet feet for Collins, Heathkit, etc. Thermoplastic Rubber feet with steel support bushing. Use #6 sheet metal or machine screw - 3/8" long
Add to Cart
RFC3 Plate Choke 225uh 1.5 amp 4kv 1.8-30 MHz
In Stock
Our best plate choke for 1.8-30 MHz Amateur Bands including WARC. Ideal for amplifiers using 811A, 572B, 813, 833, 3-500Z, 8877, 3CX800A7, 4CX1500B, etc.
Size: 5-5/8" Long x 1" Diameter Ceramic Form.
MFR: Ameritron
SKU: 10-15197
Note: For best results, solder the red wire to the terminals
Add to Cart
86-CP8 Amphenol 8 Pin Octal Male Accessory Plug
In Stock
8 Pin Octal Male Accessory Plug
MFR: Amphenol (Commonly used in Older Ham Radios, Heathkit, National, etc)
SKU: 8PINACCPLUG
