Radio & Amplifier Service Parts
Please choose from the following RADIO & AMPLIFIER SERVICE PARTS Sub-Category choices:
RFC3 Plate Choke 225uh 1.5 amp 4kv 1.8-30 MHz
In Stock
Our best plate choke for 1.8-30 MHz Amateur Bands including WARC. Ideal for amplifiers using 811A, 572B, 813, 833, 3-500Z, 8877, 3CX800A7, 4CX1500B, etc.
Size: 5-5/8" Long x 1" Diameter Ceramic Form.
MFR: Ameritron
SKU: 10-15197
Note: For best results, solder the red wire to the terminals
Add to Cart
KA11DG-110V Potter Brumfield Open Frame Relay, DPDT, 110v 10amp (NOS)
In Stock
Coil Resistance: 10kohm
Contact Voltage AC Nom: 240 V
External Width: 37.29 mm
Nom Operating Power: 1.2 W
Coil Current: 11.5 mA
External Height: 34.93 mm
Contact Current Max:10 A
External Depth: 48.8 mm
Coil Voltage VDC Nom: 110 V
Can be used as a replacement in the Heathkit SB200-SB201 Linear Amplifiers
New Old Stock * No longer available for export
MFR: Potter & Brumfield
Add to Cart
303D10 CDE 3PDT Open Frame Relay 110vdc 10 amp 10k ohm (NOS)
In Stock
Size: 1.9" Long x 1.1" Wide x 1.3" High
Possible replacement for the Heathkit SB220-221
New Old Stock * No longer available for export
MFR: Cornell Dubilier Electronics
SKU: 303D10
3PDT10A110V Open Frame Relay 3PDT 10 amp 110 vdc Coil
In Stock
- Size: 1.75" Long x 1" Wide x 1.2" High
- Can be used as a replacement in the Heathkit SB220-SB221 Linear Amplifiers
Made in Japan
SKU: 3PDT10A110V
KRUP110 KEST Enclosed Relay, 3PDT 120vac 13a, (NOS)
In Stock
Possible replacement for Heathkit SB220, SB221
New Old Stock
MFR: KEST
SKU: KRUP110
Henry 3000D Radio Frequency Power Generators from Henry Electronics
In Stock
HENRY 3000D Radio Frequency Power Generators Rated at 3000 Watts Continuous Output on 13.56 MHz
We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years. They were removed from service at "Applied Materials". The Henrys as a whole and the parts therein, are in good condition.
- Eimac 3CX3000A7 tube.
- Full Bird Dual Slug Wattmeter setup with forward and reflected power.
- Three Phase 208/240 V input.
- Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
- Power requirement: 40 Amps
Please send an email to customerservice@rfparts for any questions that you may have.
Weight 600 lbs. (Local Pickup or Truck Freight)
FOB San Marcos, CA
MFR: Henry Radio Electronics, California
Not available for export Limited Warranty
Add to Cart
ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier
In Stock
ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier
This transformer was removed from a working Henry 3000D Amplifier from the Henry Radio Industrial Division.
Size: 4-3/8" Long x 5 1/4" High x 4" wide, Weight: 13.85 lbs
Excellent condtion * No longer available for export
SKU: ECA1102
ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va Removed from Henry 3000D
In Stock
Regular Price: $194.90
Special Price $179.95
ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va MFR: ECA - Anaheim
This transformer was removed from a working Henry 3000D RF Power Generator amplifier. In excellent condtion - Like New.
Size: 4-3/8" Long x 5-3/8" High x 5" wide, Weight: 17.45 lbs
Made in USA, Limited Quantity Available, Not Available for Export
Add to Cart
POWER CORD, Removed from Henry 3000D Amplifier 8/4-220 31 FOOT 8/4 Wire with Hubbell 231A connectors
In Stock
POWERCORD-8/4-220 31 FOOT 8/4 Wire with Hubbell 231A connector, (Removed from Henry 3000D) No longer available for Export
31-1/2 feet of Royal Electric 8/4 Wire SO 90°C (4 conductor - 8 gauge) with Hubbell 4 pin connector (220v) 30amp 250v 30 installed and Thomas and Betts Chassis connector. Removed from Henry 3000D RF Power Generator Amplifier. Like new condition.
Add to Cart
Instruction Manuals Henry Electronics Power Generators (Reprint)
In Stock
Instruction Manuals for Henry Electronics Power Generators (Reprint)
Includes 2 manuals that are for the following Henry Electronics models: 500D, 1000D, 1500D, 2000D, 2500D, 3000D, and 5000D
Include:
- Specifications
- operation
- schematics
- diagrams
- Parts list
SKU: SM1000D
Add to Cart