Radio & Amplifier Service Parts
Please choose from the following RADIO & AMPLIFIER SERVICE PARTS Sub-Category choices:
3000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator
In Stock
RF Deck removed from Henry Electronics RF Power Generator 3000D. The Eimac 3CX3000A7 tube is not included. The RF Deck is rated at 3000 Watts Continuous Output on 13.56 MHz. Please send an email to rfp@rfparts.com for an explanation of our Terms of Warranty.
The deck consists of the following items:
- Case with Grid current adjuster (PA Load) and Tune adjuster (PA Tune)
- Tube socket and chimney for 3CX3000A7 tube (Tube not included) See 3CX3000A7
- Plate choke assembly
- Line Section w/ elements
- See HENRY "2000 WATT SECTION" diagram below:
Used * No longer available for export
MFR: Henry Electronics
Add to Cart
HENRY-METERPANEL 3000D Henry Electronics Meter Panel
In Stock
HENRY-METERPANEL 3000D Henry Electronics Meter Panel from a 3000D Power Generator.
Add to Cart
Henry Electronics Driver Amplifier & Power Supply for 3000D Generator 9600-0200 (Pull)
In Stock
- Uses two MRF422 150 Watt Transistors, 28 volt
Clean Pull * No longer available for export
MFR: Henry Electronics
SKU: 9600-0200-P
Add to Cart
CL2L2 Comair Rotron Caravel Axial Fan 1650 RPM 560CFM 1.0-0.88 Amps 36 Watts 115 VAC 60/50 Hz (Pull)
In Stock
Axial Fan removed from Henry Electronics 3000D RF Power Generator Amplifier. This Fan is in Like New condition. Screen included.
- Size: 10" (254mm) Diameter x 3-1/4" (44.45mm) Deep
Used * No longer available for export
MRF: Comair Rotron
Assembled in Mexico
SKU: CL2L2
ECA5027 HV Swinging Choke Transformer, 15-8 Henry, 1.5A Removed from Henry 3000D
In Stock
ECA5027 Swinging Choke Transformer, 15-8 Henry, 1.5A Continuous (Removed from Henry 3000D), MFR: ECA
This High Voltage Choke Transformer was removed from a working Henry 3000D RF Power Generator Amplifier.
It is in like-new, excellent condtion
Size: 5.5" Long x 6-1/2" High x 8" wide, Weight: 46 lbs
Limited Quantity Available No longer available for Export
Add to Cart
HENRY-CIRCUITPANEL 3000D Henry Electronics Circuit Breaker Panel
In Stock
HENRY-CIRCUITPANEL 3000D Henry Electronics Circuit Breaker Panel from a 3000D RF Power Generator.
Add to Cart
PO7D5004Y21 Aerovox Oil-filled Capacitor 4uf 5000vdc (Pull)
In Stock
This capacitor was removed from Original Henry 3000D amplifier and is in NOS condition. Henry part number C703. Completely checked and meets all factory specs. No PCB.
Size: 4 5/8" long x 3 3/4" wide x 7 1/2" high
Used * No longer available for export
MFR: Aerovox
SKU: PO7D5004Y21
4021162 Wilco Choke 2.5mh 500ma (45-4 replacement)
In Stock
Pi wound multi winding - 4 sections, Broadband 1.7-30 mhz
This part will replace the 45-4 in most Heathkit Amplifiers.
Size: 1.15" Long x 0.5" Wide
MFR: Wilco
SKU: 4021162
Add to Cart
TL323 Push Button Switch SPST 13A 125vac for Messenger amplifiers (NOS)
In Stock
TL323 Push Button Switch, SPST, used in Messenger Amplifiers
Add to Cart
RB7-9 Messenger 125 Pre-Amp Board with Relays installed (NOS)
In Stock
Messenger 125 Pre-Amp Board with Relays installed.
MFR: Messenger
SKU: RB7-9
Add to Cart
