Sockets
Sockets
RF Parts carries a tube socket for almost every type of tube out there.
If you can't find the tube socket you are looking for, give us a call. We can special order any tube socket to fit your needs!
SK300A-COMBO Eimac Tube Socket and Chimney Combination, for 4CX5000A
In Stock
Tube Socket and Chimney Combination. Removed from MRI machine.
Clean Pullout, as this combination was never in service.
MFR: Eimac
SKU: SK300A-COMBO
SK8PL Cinch 8 Pin Octal Phenolic Socket with Mounting Flange
In Stock
Socket is Black Phenolic and comes with Mounting Flange attached for chassis hole mounting.
Measurement from center hole to center hole on mounting flange is 1.3" +/-
MFR: Cinch Manufacturing Corporation
SKU: SK8PL-CINCH
SK2210 Taylor Tubes Socket Assembly for 3CX1500A7/8877 (NOS)
In Stock
Socket Assembly for 3CX1500A7/8877.
New Old Stock * No longer available for export
MFR: Taylor Tubes
SKU: SK2210-TAY
Made in China
86-CP8 Amphenol 8 Pin Octal Male Accessory Plug
In Stock
8 Pin Octal Male Accessory Plug
MFR: Amphenol (Commonly used in Older Ham Radios, Heathkit, National, etc)
SKU: 8PINACCPLUG
SK-400 Eimac Air-System Socket (NOS)
In Stock
The SK-400 Air-System Socket is the recommended socket for use with the 4-400A tetrode, and it may be used as well with 4-250A, 4-125A and other tubes having the same dimensions, like the 3-500zg, or 3cx1200A7. The SK-400 provides efficient connection between the tube and its external circuits, acts as a firm mechanical support for the tube, and controls the flow of cooling air around the tube envelope.
New Old Stock * No longer available for export
MFR: Eimac
SKU: SK400
See Data Sheet
Photo is for reference only
Add to Cart
124-0311-100 E.F. Johnson Socket For Ultra High Frequency Tubes (NOS/NIB)
In Stock
For ultra high frequency tubes. Also suitable for use with CRT buses 1EP1 and 1EP11 with E.l.A. base no. E11-22. Base material has low dielectric constant which results in low pin-topin and shunt capacity. Continuous heat resistance to 500 °F. Mounting lugs provide low inductance grounding. Three point mounting stability. 11- pin configuration.
• Raised pads for excellent base pin cooling
• For tubes such as 3CX400A7, 3CX800A7, RCA 8072, 8121, and 8122
New Old Stock * New In Box * No longer available for export
MFR: E.F. Johnson
SKU: 124-0311-100-BOX
Add to Cart
TS103P01 Cinch 9 Pin Phenolic Tube Socket Chassis Mount (NOS)
In Stock
TS103P01 9 Pin Phenolic Tube Socket Chassis Mount (NOS)
New Old Stock * No longer available for export
MFR: TRW/Cinch
SKU: TS103P01
SK7-MINI-SH-E Socket 7 Pin Miniature with Shield (NOS)
In Stock
SK7-MINI-SH-E Socket 7 Pin Miniature with Shield
- Insulation: Bakelite
MFR: ELCO / EBY
SKU: SK7-MINI-SH-E
001838-EI Eimac Middle Filament Collet for SK300 Socket (NOS)
In Stock
Middle Filament Collet for Eimac SK300 tube Socket used for 4CX5000A transmitting tube
New Old Stock * No longer available for export
MFR: Eimac
SKU: 001838-EI
Six Month Warranty
001839 Eimac Control Grid Collet for SK300 Socket (NOS)
In Stock
This is the collet that fits on the outside of 001837 & 001838 Collects on SK300 Eimac tube socket. Size: 3.8" Inside Diameter
New Old Stock
MFR: Eimac
SKU: 001839-EI
