EIMAC
-
4X150G Eimac JAN- 8172 Transmitting Tetrode Tube Air Cooled (NOS)
$74.91 -
-
4X150G Eimac JAN- 8172 Transmitting Tetrode Tube, Air Cooled (Pull)
$56.91 -
304TH Eimac/Jan-CIM Medium-mu Power Triode (NOS/NIB)
$299.91The Eimac 304TH is a medium-mu power triode intended for use as an amplifier, occilator or modulator. It has a maximum plate dissapation rating of 300 watts and a maximum plate voltage rating of 3000 volts at frequencies up to 40 Mc.
1200 watts plate power output with 53 watts driving power.
New Old Stock * New In Box * Not Available for Export
MFR: Eimac * Made in USA
SKU: 304THMade in the USA -
-
3CX800A7 Eimac Transmitting Tube (Low Hour Pull)
$1,124.91 -
HENRY 3000D Radio Frequency Power Generators from Henry Electronics
$3,990.95HENRY 3000D Radio Frequency Power Generators, rated at 3000 Watts Continuous Output on 13.56 MHz
We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years. They were removed from service at "Applied Materials". The Henrys as a whole and the parts therein, are in good condition. Each unit is tested and evaluated by our Chief RF Engineer, W6NQ.
- Eimac 3CX3000A7 tube.
- Full Bird Dual Slug Wattmeter setup with forward and reflected power.
- Three Phase 208/240 V input.
- Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
- Power requirement: 40 Amps
Please send an email to customerservice@rfparts for any questions that you may have.
Weight 600 lbs. (Local Pickup or Truck Freight)
FOB San Marcos, CA
MFR: Henry Radio Electronics, California
Not available for export Limited Warranty
Made in the USA -
4CX250R Eimac Transmitting Tube 7580W (Pull)
$217.91Transmitting Tube 7580W/4CX250R Broadcast/Industrial
Used * No longer available for export
MFR: Eimac
SKU: 4CX250R-EI-PNOTE: Picture for reference only, Condition and Cosmetics may vary
This tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Thirty Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.
Made in the USA -
7203/4CX250B Eimac Ceramic Transmitting Tube (Pull)
$217.91Transmitting Tube, Ceramic
Broadcast/Industrial
Used * No longer available for export
MFR: Eimac
SKU: 4CX250B-EI-PNOTE: PICTURE FOR REFERENCE ONLY. CONDITION MAY VARY
This tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Thirty Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.
Made in the USA -
4CX250B/7203 Eimac Transmitting Tube (NOS)
$289.91Eimac Transmitting Tube
New Old Stock * No longer available for export
SKU: 4CX250B-EI-NOSThis New Old Stock (NOS) tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Ninety Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.
Made in the USA