1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Not finding what you are searching for. Try a partial part number.

Fixed

 

Please click on a subcategory.

USED

USED ATTENUATORS

1 WATT

1 WATT ATTENUATOR

2 WATT

2 WATT ATTENUATOR

5 WATT

5 WATT ATTENUATOR

10 WATT

10 WATT ATTENUATOR

20 WATT

20 WATT ATTENUATOR

25 WATT

25 WATT ATTENUATOR

50 WATT

50 WATT ATTENUATOR

75 WATT

75 WATT ATTENUATOR

100 WATT

100 WATT ATTENUATOR

 150 WATT

150 WATT

200 WATT

200 WATT

300 WATT

300 WATT

500 WATT

500 WATT ATTENUATOR

 1000 WATT

ABOVE 1000 WATT

ABOVE 1000 WATT ATTENUATOR

List  Grid 

per page
Set Descending Direction

  1. 2N-03-320 Inmet 2 Watt 3dB Type-N (M)-(F) Fixed Attenuator (NOS)

    2N-03-320 Inmet 2 Watt 3dB Type-N (M)-(F) Fixed Attenuator (NOS)

    $17.91

    Frequency: 2.5 GHz
    Decibles: 3
    Attenuation accuracy from 50-800MHz is +/-0.5dB Max
    VSWR from 50-800MHz is 1.15:1 Max
    Input Power 2 Watts @ 25oC
    Peak Power 250 Watts Maximum
    Impedance: 50 Ohms
    Operating Temp Range: -65oC to +125oC
    Length: 1.76 inches
    Outside Diameter: 0.62 inches
    New Old Stock * No longer available for export
    MFR: Inmet
    SKU: 2N-03-320

    Made in the USA

  2. AA-03N Microlab / FXR Fixed Attenuator 4W 3dB DC-1Ghz (Pull)

    AA-03N Microlab / FXR Fixed Attenuator 4W 3dB DC-1Ghz (Pull)

    $79.91

    Application Design: Transmission Line
    Body Surface Treatment: Silver Plated, Qq-S-365
    Input Impedance Rating In Ohms: 50.0
    Output Impedance Rating In Ohms: 50.0
    Power Rating: 4.0 Watts Average
    RF Signal Attenuation In Decibels: 3.0
    Voltage Standing Wave Ratio Frequency Range: +0.0/+2.5 Gigahertz

    NSN: 5985-00-739-1201
    Used * Clean * No longer available for export
    MFR: Microlab / FXR
    SKU: AA-03N-P

    Made in the USA
  3. 766-30 Narda 30dB 20watt DC-4GHz 50 Ohm N-Male to N-Female Medium Power Attenuator (Pull)

    766-30 Narda 30dB 20watt DC-4GHz 50 Ohm N-Male to N-Female Medium Power Attenuator (Pull)

    $112.91

    These parts are clean used parts tested to factory spec. Picture is for reference. Cosmetic condition will vary slightly. 

    • VSWR: 1.35 Maximum
    • Average Power: 20 Watts
    • Attenuation: 30dB Nominal
    • Peak Power: 1 Kilowatt

    Clean used * No longer available for export
    MFR: Narda

    SKU: 766-30-P

    Data Sheet

  4. 391-7 Midwest Microwave 7dB 10w DC-12.4GHz Fixed Attenuator (Pull)

    391-7 Midwest Microwave 7dB 10w DC-12.4GHz Fixed Attenuator (Pull)

    $49.91

    • Frequency Range: DC-12.4GHz
    • Attenuation: 10dB Nominal
    • Power : Average - 2 W Max

    Used * No longer available for export
    MFR: Midwest Microwave
    SKU: 391-7-P

    Note: Picture is for reference only

  5. 391-30 Midwest Microwave 30dB 5w DC-12.4GHz Type-N Fixed Attenuator (Pull)

    391-30 Midwest Microwave 30dB 5w DC-12.4GHz Type-N Fixed Attenuator (Pull)

    $49.91

    • Frequency Range: DC-12.4GHz
    • Attenuation: 30dB Nominal
    • Power : Average - 5w Max

    Used * No longer available for export
    MFR: Midwest Microwave
    SKU: 391-30-P

    Note: Picture is for reference only

  6. 391-40 Midwest Microwave 40dB 5w DC-12GHz Type-N Fixed Attenuator (Pull)

    391-40 Midwest Microwave 40dB 5w DC-12GHz Type-N Fixed Attenuator (Pull)

    $49.91

    • Frequency Range: DC-12GHz
    • Attenuation: 40dB Nominal
    • Power : Average - 5w Max

    Used * No longer available for export
    MFR: Midwest Microwave
    SKU: 391-40-P

    Note: Picture is for reference only

  7. A-2347 RLC Type-C Male to BNC Female Fixed Coaxial Attenuator 55dB SPL (Pull)

    A-2347 RLC Type-C Male to BNC Female Fixed Coaxial Attenuator 55dB SPL (Pull)

    $34.91

    • Frequency range:: DC-4GHz
    • Attenuation:: 55 dB
    • Impedance: 50 OHMS

    Used * No longer available for export
    MFR: RLC
    SKU: A-2347-P

  8. 120A/4 Narda Precision Calibrated Attenuation Set 2 Watt DC-18GHz (Pull)

    120A/4 Narda Precision Calibrated Attenuation Set 2 Watt DC-18GHz (Pull)

    $578.91

    This set is missing one attenuator

    Connector: Type-N Male/Female
    Attenuators included:

    • 779-6
    • 779-10
    • 779-20

    Clean Used * No longer available for export
    MFR: Narda
    SKU: 120A/4-P


  9. 118A/4 Narda Precision Calibrated Attenuation Set 2 Watt DC-12.4GHz (Pull)

    118A/4 Narda Precision Calibrated Attenuation Set 2 Watt DC-12.4GHz (Pull)

    $399.91

    Connector: Type-N Male/Female
    Attenuators included:

    • 777-3
    • 777-6
    • 779-10
    • 779-20

    Clean Used * No longer available for export
    MFR: Narda
    SKU: 118A/4-P

    Made in the USA

  10. 2-A-MFN-20 Bird 2 Watt 20dB N-Male to N-Female Attenuator (Pull)

    2-A-MFN-20 Bird 2 Watt 20dB N-Male to N-Female Attenuator (Pull)

    $60.91

    • Frequency: DC-4GHz
    • Voltage: 2 Watts

    Clean Used * No longer available for export
    MFR: Bird Electronics
    SKU: 2-A-MFN-20-P

    Made in the USA

Items 21 to 30 of 147 total

Page:
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
Shop By

Shopping Options

Category
  1. USED - Various Values
  2. 1 Watt
  3. 2 Watt
  4. 5 Watt
  5. 10 Watt
  6. 20 Watt
  7. 25 Watt
  8. 50 Watt
  9. 100 Watt
  10. 150 Watt
  11. 200 Watt
  12. 300 Watt
  13. 500 Watt
  14. Surface Mount
Manufacturer
  1. Aeroflex
  2. Aeroflex / API-Inmet
  3. Aeroflex / Inmet
  4. API / Inmet
  5. API/Inmet
  6. Bird
  7. Bird (Special order - 4-6 weeks ARO)
  8. Bird Electronics
  9. Fairview Microwave
  10. Inmet (API Tech)
  11. JFW
  12. Microlab/FXR
  13. Narda
  14. Narda Microwave-East
  15. Omni Spectra
  16. Tamagawa Electronics Co. Ltd.
  17. Weinchel
  18. WEINSCHEL CORP
Product Categories
Hours Monday - Friday
7:00 - 3:30 PST

 Celebrating 50 years in business

RF Parts Company

435 S Pacific St
San Marcos, CA, 92078, USA

1-800-RFPARTS (1-800-737-2787)

1-760-744-0700, #1

Minimum Order
  • Fifteen ($15.00), all inclusive.
  • Preferred Payments for Domestic and International Purchases: PayPal, VISA, MasterCard, American Express, Direct Deposit, and Wire Transfer.
  • All checks will be held for clearance. This process takes 5 - 7 business days.

Buy with confidence



© 1998 to RF Parts Company. All Rights Reserved.