Chokes & Inductors
Please choose from the following CHOKE / INDUCTOR Sub-Catagory choices:
Heavy Duty Roller Inductor 6.2uh with Shaft Coupler (Pull)
In Stock
- Microhenry: 6.2
- Turns: 6 per inch
Used
MFR: E.F. Johnson
SKU: HDRI-6.2-P
229-201 Johnson Roller Inductor 10uh (Pull)
In Stock
- Microhenry: 10
- 17 turns
Used
MFR: E.F. Johnson
SKU: 229-201-P
Vintage Edge Wound Roller Inductor 37.5μh (Pull)
In Stock
- Size: 6-9/16" x 4" x 3-5/8"
- Henries: 37.5μh
- 35.5 turns
- 7 turns per inch
- Coil thickness: 0.064"
Used * No longer available for export
MFR: Unbranded
SKU: Vintage-37-5-P
Add to Cart
L0201 (406-1) La Pointe Roller Inductor 10uh (Pull)
In Stock
18 Coils
Substitute for Johnson 229-201-11
Used Clean * No longer available for export
MFR: La Pointe
SKU: L0201-406-1-P
Note: Picture is for reference only
Add to Cart
229-201-11 Johnson Roller Inductor 10uh (Pull)
In Stock
18 Coils
10uh
Used Clean * No longer available for export
MFR: E.F. Johnson
SKU: 229-201-11-P
Note: Picture is for reference only
Add to Cart
755017A4530 Harris Roller Inductor 18uh FSCM 14304 (NOS)
In Stock
Size: 4-1/8" x 4-1/8" x 4-1/2"
This inductor was made for a military application. It has only one ¼” diameter shaft connection.
The coil is 0.25” x 0.040”, heavy silver plated, ribbon wound.
Two wipers are approximately 1/8” in diameter. One on each side of the ribbon.
New Old Stock * No longer available for export
MFR: Harris LLC
SKU: 755017A4530
NSN # 5950010576092
NOTE: The frames are either black or green. The color does not affect performance.
Add to Cart
SFC-8 Kitagawa Snap On Ferrite Interference Choke Fits 0.32" Outside Diameter Cable (NOS)
In Stock
- Nominal H x W x L: 0.8" x 0.8" x 1.27"
- Typical Cable Types: RG8X, RG58, RG59, LMR240
- Impedance at 25MHz: 137 Ohm
- Impedance at 100MHz: 204 Ohm
- RoHS: Yes
New Old Stock * No longer available for export
MFR: Kitagawa Industries Company, LTD.
SKU: FERCKE-BB
Add to Cart
0443164151 Fair-Rite Snap On Ferrite Interference Choke
In Stock
- Maximum Cable Diameter: 0.5"
- Nominal H x W x L: 1.2" x 1.3" x 1.3"
- Typical Cable Types: 9913, RG8, RG213, LMR400
- Frequency Range: Broadband Frequencies 25-300 MHz (43 & 44 materials)
MFR: Fair-Rite
SKU: FERCKE-A
ZCAT2436-1330 TDK Snap On Ferrite Interference Choke Fits 1/2 inch Cable
In Stock
- Maximum Cable Diameter: 0.5"
- Nominal Dimensions: 0.875" OD x .437"
- Typical Cable Types: RG8, RG213, LMR400
MFR: TDK
SKU: FERCKE-AA
0444167281 TDK Snap On Ferrite Interference Choke for Cable with 0.388" Outside Diameter
In Stock
- Maximum Cable Diameter: 0.388"
- Nominal H x W x L: 0.933" OD x 1.55"
- Typical Cable Types: RG8X, RG58, LMR195, LMR240, RG6
MFR: TDK
SKU: FERCKE-DD
Add to Cart
