Crimping Tools & Dies
Please choose from the following Crimp Tools & Die Sets Sub-Category choices:
RFA-4009-20 RF Industries Professional Grade Heavy Duty Crimp Handle
In Stock
For LMR600
No dies included - handle only
Piston Style Crimp Tool
MFR: RF Industries
SKU: RFA-4009-20
47-10000 Amphenol Ratcheting Crimp Tool
In Stock
Crimp Frame without Die Sets
MFR: Amphenol
SKU: 47-10000
RFA-4005-20 RF Industries Crimping Tool Handle
In Stock
The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors ratchet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism.
MFR: RF Industries
SKU: RFA-4005-20
See Die Sets
Add to Cart
RFA-4005-21 RF Industries Die Set for Non-Insulated Terminals For AWG 22-8
In Stock
Works in RFA-4005-20 Crimp Handle
MFR: RF Industries
SKU: RFA-4005-21
RFA-4005-06 RF Industries Die Set for RFA-4005-20 Crimp Handle
In Stock
The RFA-4005-06 Precision Die Set is used to crimp RG-59, RG-6, & F-TYPE (CATV) coaxial cables.
Hex Cavity Dimensions: .255, .324, .354 inch
MFR: RF Industries
SKU: RFA-4005-06
RFA-4005-07 RF Industries Die Set for RFA4005-20 Crimp Handle
In Stock
Die set for Cable Group C
RG58/U & Use with RFA-4005-20
MFR: RF Industries
SKU: RFA-4005-07
RFA-4005-10 RF Industries Die Set for RFA4005-20 Crimp Handle
In Stock
For RG-8, RG-11 and RG-213 coaxial cable.
Hex Cavity Dimensions: .080, .10, .429
Use with Handle RFA4005-20
MFR: RF Industries
SKU: RFA-4005-10
RFA-4005-14 RF Industries Die set for RFA4005 Crimp Handle
In Stock
This die size is for LMR400 cable. The die sizes are for both the center pin and ferrule.
MFR: RF Industries
SKU: RFA-4005-14
Add to Cart
47-20001 Amphenol Crimp Die Set for 47-10000 Crimp Tool Handle
In Stock
- Will work for Cable Types: RG-59/U and Belden 8281. Cable Groups D and G connectors.
- Will work on RF Industries RFA4005-20 handle and some Paladin models.
- Hex Cavity Dimensions: 324", .255", .068", .042".
MFR: Amphenol
SKU: 47-20001
47-20002 Amphenol Crimp Die Set for 47-10000 Crimp Tool Handle
In Stock
- Will work on the following cable types: RG174, RG188, RG316, LMR100A, RG58, LMR195. Cable Groups B & C Connectors.
- Will also work on RF Industries Handle RFA4005-20 and some Paladin models.
- Hex Cavity Dimensions are .042, .068, .178, .213.
MFR: Amphenol
SKU: 47-20002
