Fuse Holders
Fuse Holders
Fuse holders are essential components that provide a secure connection for fuses in electrical circuits. They ensure reliability and safety in various applications.
FUSELEAD-AGU Fuselead for AGU Type Fuses, 21 inch length, 8 awg Red Wire (No Fuse) Messinger
In Stock
- 21 inch length
- Replacement Fuselead used in the Messinger Amplifiers.
- Uses an AGU type fuse (Not Included).
SKU: FUSELEAD-AGU
BK/HPM Panel Mount Fuse Holder 20 Amp 600v
In Stock
- Fuse Size / Group: 10.3 mm x 38 mm
- Includes Mounting Nut
- Max Current Rating: 30 A
- Voltage Rating: 600 VAC
- Fuse Sold Seperately KTK-20 100kA 600v Fuse
MFR: Eaton
SKU: BK/HPM
345001 Littlefuse Fuse Holder (NOS)
In Stock
NSN #: 5920-01-005-9621
Tektronix #: 352-0360-00
New Old Stock * No longer available for export
MFR: Littlefuse - Subsidiary of Tracor
SKU: 345001
11509A Hewlett Packard Fuse Holder with Type N Male/Female Connectors (Pull)
In Stock
The HP 11509A is a Fused Attenuator Protector. Prevents output attenuators from burning out when working with tranciever type equipment. If the transmitter is accidentally keyed the 11509A prevents power from being applied to the RF Output jack.
Can be used with BNC to Type-N adapters.
Used * No longer available for export
MFR: Hewlett Packard
SKU: 11509A-P
C-11 ILSCO 60A-250V Fuse / Resistor Clip 0.64 Inch Diameter (NOS)
In Stock
Material: Copper Alloy
Plating: Nickel / Tin
Connector Amperage Rating: 60 Amps
Voltage Rating: 250V
New Old Stock * No longer available for export
MFR: ILSCO Corporation
SKU: C-11
FC7 Fuse Clip 0.35 Inch Diameter (Pull)
In Stock
- Inside Diameter: 0.35 in. / 8.89 mm.
- Silver plated copper alloy
Used * No longer available for export
SKU: FC7
FC8 Little Fuse Rivet/Eyelet Type Fuse Clip 0.5 Inch Diameter (Pull)
In Stock
- Inside Diameter: 0.5 in. / 12.7 mm.
- Size: 7/8" high x 19/32" deep x 5/8" wide
- Silver plated copper alloy
Used * No longer available for export
SKU: FC8
FC9 Little Fuse Rivet/Eyelet Type Fuse Clip 9/16 Inch Diameter (Pull)
In Stock
- Inside Diameter: 9/16 in. / 14.2875 mm.
- Size: 15/16" high x 19/32" deep x 21/32" wide
- Silver plated copper alloy
Used * No longer available for export
SKU: FC9
FC10 Rivet/Eyelet Type Fuse Clip 9/16 Inch Diameter with Hardware (Pull)
In Stock
- Inside Diameter: 9/16 in. / 14.2875 mm.
- Size: 13/16" high x 17/16" deep x 3/4" wide
- Silver plated copper alloy
Used * No longer available for export
MFR: Unbranded
SKU: FC10
Vintage Littlefuse Fuse Block for AGC Type Fuses (Pull)
In Stock
Vintage Littlefuse Fuse Block for AGC Type Fuses (Pull)
Works with AGC type fuses.
30 amps
MFR: Littlefuse
SKU: LFAGC30-P
