1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Miscellaneous

73-1200-38 Capacitor, variable 23-176pf, 38 Plates, DA101-PB-B Toggle Switch, SPST, 5a 250vac, Carling, 221CHAS Original Aluminum chassis, 221 Amplifier, DF3000 Low pass filter, 4kw pep, 1 kw rms. 30 mhz, RF Limited, 8PINACCCOVER 8 Pin Octal Accessory Cover, 8PINACCPLUG 8 Pin Octal Male Accessory Plug, Amphenol, NFB4 Feedback Modification Kit - 4 Transistor Amplifier, 54P2923 Emi common-mode inductor, 25a, .005 ohm 3kv

List  Grid 

per page
Set Descending Direction

  1. Model BK-43 Van Ordt Adjust-A-Bracket for Mobile Radios (NOS)

    Model BK-43 Van Ordt Adjust-A-Bracket for Mobile Radios (NOS)

    $7.90

    • Adjusts widths from 3-3/4" to 6-1/8"
    • For use under dashboards or on floor of auto

    New Old Stock
    MFR: Van Ordt, Inc.
    SKU: BK-43

    Made in the USA
  2. CB-003 RF Limited "Road Noise" Dynamic CB Microphone 5 Pin (NOS/NIB)

    CB-003 RF Limited "Road Noise" Dynamic CB Microphone 5 Pin (NOS/NIB)

    $29.90

    • Connector: Model E 5 Pin
    • Pin 1 - Red / Pin 2 - Shield / Pin 3 - Blue / Pin 4 - Black / Pin 5 - White

    New Old Stock * New In Box * No longer available for export
    MFR: RF Limited
    Made in Japan
    SKU: CB-003E

  3. CB-003 RF Limited "Road Noise" Dynamic CB Microphone 4 Pin (NOS/NIB)

    CB-003 RF Limited "Road Noise" Dynamic CB Microphone 4 Pin (NOS/NIB)

    $29.90

    • Connector: Model A 4 Pin
    • Pin 1 - Shield & Black / Pin 2 - Red / Pin 3 - White / Pin 4 - Blue 

    New Old Stock * New In Box * No longer available for export
    MFR: RF Limited
    Made in Japan
    SKU: CB-003A

  4. 1P11P Vintage Band Switch with Mounting Bracket (Pull)

    1P11P Vintage Band Switch with Mounting Bracket (Pull)

    $29.91

    • Shaft: 1/4" diameter x 1" long
    • 1 Pole
    • 11 Position
    • Size: 3-1/4" x 2-3/4" x 3-3/8"

    Used * Pulled from vintage equipment
    MFR: Unbranded
    SKU: 1P11PBS-P

  5. 1P9P Vintage Band Switch (Pull)

    1P9P Vintage Band Switch (Pull)

    $29.91

    • Shaft: 1/4" diameter x 1" long
    • 1 Pole
    • 9 Position
    • Size: 5" x 4" x 5-1/16"

    Used * Pulled from vintage equipment
    MFR: Unbranded
    SKU: 1P9PBS-P

  6. CBE-2005 Road Noise Power Base Station Microphone (NOS/NIB)

    CBE-2005 Road Noise Power Base Station Microphone (NOS/NIB)

    $69.91

    • With Roger Beep

    New Old Stock * New In Box
    MFR: Road Noise
    Made in Japan
    SKU: CBE-2005


  7. Model 91-206 Ten-Tec Tilt-Up Bar for CB Radios (NOS)

    Model 91-206 Ten-Tec Tilt-Up Bar for CB Radios (NOS)

    $9.91

    Model 91-206 Ten-Tec Tilt-Up Bar for CB Radios (NOS)

    New Old Stock
    MFR: Ten-Tec
    SKU: 91-206

    Made in the USA
  8. Installation Operation and Maintenance Manual for the Siltronix 1011D Transceiver

    Installation Operation and Maintenance Manual for the Siltronix 1011D Transceiver

    $10.91

    Installation Operation and Maintenance Manual for the Siltronix 1011D Transceiver.  Reprint of the original manual

    Includes:

    • Introduction
    • Specifications
    • Installation
    • Operation
    • Circuit Theory
    • Alignment and Troubleshooting
    • Parts List

    SKU: SM1011D

  9. 5 Inch Mounting Bracket for Jennings Vacuum Variable Capacitor (Pull)

    5 Inch Mounting Bracket for Jennings Vacuum Variable Capacitor (Pull)

    $5.91

    • Bracket Size: 5" wide x 5" high x 2" deep
    • Hole Size: 3" diameter

    Used * Pulled from working equipment
    SKU: 552-3-BKT-P

  10. 4 Inch Mounting Bracket for Jennings Vacuum Variable Capacitor (Pull)

    4 Inch Mounting Bracket for Jennings Vacuum Variable Capacitor (Pull)

    $4.91

    • Bracket Size: 4" wide x 4-1/2" high x 2" deep
    • Hole Size: 2" diameter

    Used * Pulled from working equipment
    SKU: 44.52-2-BKT-P

Items 31 to 40 of 93 total

Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6